LOOP(4) Linux Programmer's Manual LOOP(4)
NAME
loop, loop-control - loop devices
SYNOPSIS
#include <linux/loop.h>
DESCRIPTION
The loop device is a block device that maps its data blocks not to a
physical device such as a hard disk or optical disk drive, but to the
blocks of a regular file in a filesystem or to another block device.
This can be useful for example to provide a block device for a filesys-
tem image stored in a file, so that it can be mounted with the mount(8)
command. You could do
$ dd if=/dev/zero of=file.img bs=1MiB count=10
$ sudo losetup /dev/loop4 file.img
$ sudo mkfs -t ext4 /dev/loop4
$ sudo mkdir /myloopdev
$ sudo mount /dev/loop4 /myloopdev
See losetup(8) for another example.
A transfer function can be specified for each loop device for encryp-
tion and decryption purposes.
The following ioctl(2) operations are provided by the loop block de-
vice:
LOOP_SET_FD
Associate the loop device with the open file whose file descrip-
tor is passed as the (third) ioctl(2) argument.
LOOP_CLR_FD
Disassociate the loop device from any file descriptor.
LOOP_SET_STATUS
Set the status of the loop device using the (third) ioctl(2) ar-
gument. This argument is a pointer to loop_info structure, de-
fined in <linux/loop.h> as:
struct loop_info {
int lo_number; /* ioctl r/o */
dev_t lo_device; /* ioctl r/o */
unsigned long lo_inode; /* ioctl r/o */
dev_t lo_rdevice; /* ioctl r/o */
int lo_offset;
int lo_encrypt_type;
int lo_encrypt_key_size; /* ioctl w/o */
int lo_flags; /* ioctl r/w (r/o before
Linux 2.6.25) */
char lo_name[LO_NAME_SIZE];
unsigned char lo_encrypt_key[LO_KEY_SIZE];
/* ioctl w/o */
unsigned long lo_init[2];
char reserved[4];
};
The encryption type (lo_encrypt_type) should be one of
LO_CRYPT_NONE, LO_CRYPT_XOR, LO_CRYPT_DES, LO_CRYPT_FISH2,
LO_CRYPT_BLOW, LO_CRYPT_CAST128, LO_CRYPT_IDEA, LO_CRYPT_DUMMY,
LO_CRYPT_SKIPJACK, or (since Linux 2.6.0) LO_CRYPT_CRYPTOAPI.
The lo_flags field is a bit mask that can include zero or more
of the following:
LO_FLAGS_READ_ONLY
The loopback device is read-only.
LO_FLAGS_AUTOCLEAR (since Linux 2.6.25)
The loopback device will autodestruct on last close.
LO_FLAGS_PARTSCAN (since Linux 3.2)
Allow automatic partition scanning.
LOOP_GET_STATUS
Get the status of the loop device. The (third) ioctl(2) argu-
ment must be a pointer to a struct loop_info.
LOOP_CHANGE_FD (since Linux 2.6.5)
Switch the backing store of the loop device to the new file
identified file descriptor specified in the (third) ioctl(2) ar-
gument, which is an integer. This operation is possible only if
the loop device is read-only and the new backing store is the
same size and type as the old backing store.
LOOP_SET_CAPACITY (since Linux 2.6.30)
Resize a live loop device. One can change the size of the un-
derlying backing store and then use this operation so that the
loop driver learns about the new size. This operation takes no
argument.
LOOP_SET_DIRECT_IO (since Linux 4.10)
Set DIRECT I/O mode on the loop device, so that it can be used
to open backing file. The (third) ioctl(2) argument is an un-
signed long value. A non-zero represents direct I/O mode.
LOOP_SET_BLOCK_SIZE (since Linux 4.14)
Set the block size of the loop device. The (third) ioctl(2) ar-
gument is an unsigned long value. This value must be a power of
two in the range [512,pagesize]; otherwise, an EINVAL error re-
sults.
Since Linux 2.6, there are two new ioctl(2) operations:
LOOP_SET_STATUS64, LOOP_GET_STATUS64
These are similar to LOOP_SET_STATUS and LOOP_GET_STATUS de-
scribed above but use the loop_info64 structure, which has some
additional fields and a larger range for some other fields:
struct loop_info64 {
uint64_t lo_device; /* ioctl r/o */
uint64_t lo_inode; /* ioctl r/o */
uint64_t lo_rdevice; /* ioctl r/o */
uint64_t lo_offset;
uint64_t lo_sizelimit; /* bytes, 0 == max available */
uint32_t lo_number; /* ioctl r/o */
uint32_t lo_encrypt_type;
uint32_t lo_encrypt_key_size; /* ioctl w/o */
uint32_t lo_flags; i /* ioctl r/w (r/o before
Linux 2.6.25) */
uint8_t lo_file_name[LO_NAME_SIZE];
uint8_t lo_crypt_name[LO_NAME_SIZE];
uint8_t lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
uint64_t lo_init[2];
};
/dev/loop-control
Since Linux 3.1, the kernel provides the /dev/loop-control device,
which permits an application to dynamically find a free device, and to
add and remove loop devices from the system. To perform these opera-
tions, one first opens /dev/loop-control and then employs one of the
following ioctl(2) operations:
LOOP_CTL_GET_FREE
Allocate or find a free loop device for use. On success, the
device number is returned as the result of the call. This oper-
ation takes no argument.
LOOP_CTL_ADD
Add the new loop device whose device number is specified as a
long integer in the third ioctl(2) argument. On success, the
device index is returned as the result of the call. If the de-
vice is already allocated, the call fails with the error EEXIST.
LOOP_CTL_REMOVE
Remove the loop device whose device number is specified as a
long integer in the third ioctl(2) argument. On success, the
device number is returned as the result of the call. If the de-
vice is in use, the call fails with the error EBUSY.
FILES
/dev/loop*
The loop block special device files.
EXAMPLES
The program below uses the /dev/loop-control device to find a free loop
device, opens the loop device, opens a file to be used as the underly-
ing storage for the device, and then associates the loop device with
the backing store. The following shell session demonstrates the use of
the program:
$ dd if=/dev/zero of=file.img bs=1MiB count=10
10+0 records in
10+0 records out
10485760 bytes (10 MB) copied, 0.00609385 s, 1.7 GB/s
$ sudo ./mnt_loop file.img
loopname = /dev/loop5
Program source
#include <fcntl.h>
#include <linux/loop.h>
#include <sys/ioctl.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#define errExit(msg) do { perror(msg); exit(EXIT_FAILURE); \
} while (0)
int
main(int argc, char *argv[])
{
int loopctlfd, loopfd, backingfile;
long devnr;
char loopname[4096];
if (argc != 2) {
fprintf(stderr, "Usage: %s backing-file\n", argv[0]);
exit(EXIT_FAILURE);
}
loopctlfd = open("/dev/loop-control", O_RDWR);
if (loopctlfd == -1)
errExit("open: /dev/loop-control");
devnr = ioctl(loopctlfd, LOOP_CTL_GET_FREE);
if (devnr == -1)
errExit("ioctl-LOOP_CTL_GET_FREE");
sprintf(loopname, "/dev/loop%ld", devnr);
printf("loopname = %s\n", loopname);
loopfd = open(loopname, O_RDWR);
if (loopfd == -1)
errExit("open: loopname");
backingfile = open(argv[1], O_RDWR);
if (backingfile == -1)
errExit("open: backing-file");
if (ioctl(loopfd, LOOP_SET_FD, backingfile) == -1)
errExit("ioctl-LOOP_SET_FD");
exit(EXIT_SUCCESS);
}
SEE ALSO
losetup(8), mount(8)
COLOPHON
This page is part of release 5.07 of the Linux man-pages project. A
description of the project, information about reporting bugs, and the
latest version of this page, can be found at
https://www.kernel.org/doc/man-pages/.
Linux 2020-06-09 LOOP(4)