HEXDUMP(1) User Commands HEXDUMP(1)
NAME
hexdump - display file contents in hexadecimal, decimal, octal, or
ascii
SYNOPSIS
hexdump [options] file...
DESCRIPTION
The hexdump utility is a filter which displays the specified files, or
standard input if no files are specified, in a user-specified format.
OPTIONS
Below, the length and offset arguments may be followed by the multi-
plicative suffixes KiB (=1024), MiB (=1024*1024), and so on for GiB,
TiB, PiB, EiB, ZiB and YiB (the "iB" is optional, e.g., "K" has the
same meaning as "KiB"), or the suffixes KB (=1000), MB (=1000*1000),
and so on for GB, TB, PB, EB, ZB and YB.
-b, --one-byte-octal
One-byte octal display. Display the input offset in hexadeci-
mal, followed by sixteen space-separated, three-column, zero-
filled bytes of input data, in octal, per line.
-c, --one-byte-char
One-byte character display. Display the input offset in hexa-
decimal, followed by sixteen space-separated, three-column,
space-filled characters of input data per line.
-C, --canonical
Canonical hex+ASCII display. Display the input offset in hexa-
decimal, followed by sixteen space-separated, two-column, hexa-
decimal bytes, followed by the same sixteen bytes in %_p format
enclosed in '|' characters. Invoking the program as hd implies
this option.
-d, --two-bytes-decimal
Two-byte decimal display. Display the input offset in hexadeci-
mal, followed by eight space-separated, five-column, zero-
filled, two-byte units of input data, in unsigned decimal, per
line.
-e, --format format_string
Specify a format string to be used for displaying data.
-f, --format-file file
Specify a file that contains one or more newline-separated for-
mat strings. Empty lines and lines whose first non-blank char-
acter is a hash mark (#) are ignored.
-L, --color[=when]
Accept color units for the output. The optional argument when
can be auto, never or always. If the when argument is omitted,
it defaults to auto. The colors can be disabled; for the cur-
rent built-in default see the --help output. See also the Col-
ors subsection and the COLORS section below.
-n, --length length
Interpret only length bytes of input.
-o, --two-bytes-octal
Two-byte octal display. Display the input offset in hexadeci-
mal, followed by eight space-separated, six-column, zero-filled,
two-byte quantities of input data, in octal, per line.
-s, --skip offset
Skip offset bytes from the beginning of the input.
-v, --no-squeezing
The -v option causes hexdump to display all input data. Without
the -v option, any number of groups of output lines which would
be identical to the immediately preceding group of output lines
(except for the input offsets), are replaced with a line com-
prised of a single asterisk.
-x, --two-bytes-hex
Two-byte hexadecimal display. Display the input offset in hexa-
decimal, followed by eight space-separated, four-column, zero-
filled, two-byte quantities of input data, in hexadecimal, per
line.
-V, --version
Display version information and exit.
-h, --help
Display help text and exit.
For each input file, hexdump sequentially copies the input to standard
output, transforming the data according to the format strings specified
by the -e and -f options, in the order that they were specified.
FORMATS
A format string contains any number of format units, separated by
whitespace. A format unit contains up to three items: an iteration
count, a byte count, and a format.
The iteration count is an optional positive integer, which defaults to
one. Each format is applied iteration count times.
The byte count is an optional positive integer. If specified it de-
fines the number of bytes to be interpreted by each iteration of the
format.
If an iteration count and/or a byte count is specified, a single slash
must be placed after the iteration count and/or before the byte count
to disambiguate them. Any whitespace before or after the slash is ig-
nored.
The format is required and must be surrounded by double quote (" ")
marks. It is interpreted as a fprintf-style format string (see
fprintf(3), with the following exceptions:
1. An asterisk (*) may not be used as a field width or precision.
2. A byte count or field precision is required for each s conver-
sion character (unlike the fprintf(3) default which prints the
entire string if the precision is unspecified).
3. The conversion characters h, l, n, p, and q are not supported.
4. The single character escape sequences described in the C stan-
dard are supported:
NULL \0
<alert character> \a
<backspace> \b
<form-feed> \f
<newline> \n
<carriage return> \r
<tab> \t
<vertical tab> \v
Conversion strings
The hexdump utility also supports the following additional conversion
strings.
_a[dox]
Display the input offset, cumulative across input files, of the
next byte to be displayed. The appended characters d, o, and x
specify the display base as decimal, octal or hexadecimal re-
spectively.
_A[dox]
Identical to the _a conversion string except that it is only
performed once, when all of the input data has been processed.
_c Output characters in the default character set. Non-printing
characters are displayed in three-character, zero-padded octal,
except for those representable by standard escape notation (see
above), which are displayed as two-character strings.
_p Output characters in the default character set. Non-printing
characters are displayed as a single '.'.
_u Output US ASCII characters, with the exception that control
characters are displayed using the following, lower-case, names.
Characters greater than 0xff, hexadecimal, are displayed as
hexadecimal strings.
000 nul 001 soh 002 stx 003 etx 004 eot 005 enq
006 ack 007 bel 008 bs 009 ht 00A lf 00B vt
00C ff 00D cr 00E so 00F si 010 dle 011 dc1
012 dc2 013 dc3 014 dc4 015 nak 016 syn 017 etb
018 can 019 em 01A sub 01B esc 01C fs 01D gs
01E rs 01F us 0FF del
Colors
When put at the end of a format specifier, hexdump highlights the re-
spective string with the color specified. Conditions, if present, are
evaluated prior to highlighting.
_L[color_unit_1,color_unit_2,...,color_unit_n]
The full syntax of a color unit is as follows:
[!]COLOR[:VALUE][@OFFSET_START[-END]]
! Negate the condition. Please note that it only makes sense to
negate a unit if both a value/string and an offset are speci-
fied. In that case the respective output string will be high-
lighted if and only if the value/string does not match the one
at the offset.
COLOR One of the 8 basic shell colors.
VALUE A value to be matched specified in hexadecimal, or octal base,
or as a string. Please note that the usual C escape sequences
are not interpreted by hexdump inside the color_units.
OFFSET An offset or an offset range at which to check for a match.
Please note that lone OFFSET_START uses the same value as END
offset.
Counters
The default and supported byte counts for the conversion characters are
as follows:
%_c, %_p, %_u, %c
One byte counts only.
%d, %i, %o, %u, %X, %x
Four byte default, one, two and four byte counts supported.
%E, %e, %f, %G, %g
Eight byte default, four byte counts supported.
The amount of data interpreted by each format string is the sum of the
data required by each format unit, which is the iteration count times
the byte count, or the iteration count times the number of bytes re-
quired by the format if the byte count is not specified.
The input is manipulated in blocks, where a block is defined as the
largest amount of data specified by any format string. Format strings
interpreting less than an input block's worth of data, whose last for-
mat unit both interprets some number of bytes and does not have a spec-
ified iteration count, have the iteration count incremented until the
entire input block has been processed or there is not enough data re-
maining in the block to satisfy the format string.
If, either as a result of user specification or hexdump modifying the
iteration count as described above, an iteration count is greater than
one, no trailing whitespace characters are output during the last iter-
ation.
It is an error to specify a byte count as well as multiple conversion
characters or strings unless all but one of the conversion characters
or strings is _a or _A.
If, as a result of the specification of the -n option or end-of-file
being reached, input data only partially satisfies a format string, the
input block is zero-padded sufficiently to display all available data
(i.e., any format units overlapping the end of data will display some
number of the zero bytes).
Further output by such format strings is replaced by an equivalent num-
ber of spaces. An equivalent number of spaces is defined as the number
of spaces output by an s conversion character with the same field width
and precision as the original conversion character or conversion string
but with any '+', ' ', '#' conversion flag characters removed, and ref-
erencing a NULL string.
If no format strings are specified, the default display is very similar
to the -x output format (the -x option causes more space to be used be-
tween format units than in the default output).
EXIT STATUS
hexdump exits 0 on success and >0 if an error occurred.
EXAMPLES
Display the input in perusal format:
"%06.6_ao " 12/1 "%3_u "
"\t\t" "%_p "
"\n"
Implement the -x option:
"%07.7_Ax\n"
"%07.7_ax " 8/2 "%04x " "\n"
MBR Boot Signature example: Highlight the addresses cyan and the bytes at
offsets 510 and 511 green if their value is 0xAA55, red otherwise.
"%07.7_Ax_L[cyan]\n"
"%07.7_ax_L[cyan] " 8/2 " %04x_L[green:0xAA55@510-511,!red:0xAA55@510-511] " "\n"
COLORS
Implicit coloring can be disabled by an empty file /etc/terminal-col-
ors.d/hexdump.disable.
See terminal-colors.d(5) for more details about colorization configura-
tion.
STANDARDS
The hexdump utility is expected to be IEEE Std 1003.2 ("POSIX.2") com-
patible.
AVAILABILITY
The hexdump command is part of the util-linux package and is available
from Linux Kernel Archive <https://www.kernel.org/pub/linux/utils/util-
linux/>.
util-linux April 2013 HEXDUMP(1)