snmp_standard_mib(3erl) Erlang Module Definition snmp_standard_mib(3erl)
NAME
snmp_standard_mib - Instrumentation Functions for STANDARD-MIB and SN-
MPv2-MIB
DESCRIPTION
The module snmp_standard_mib implements the instrumentation functions
for the STANDARD-MIB and SNMPv2-MIB, and functions for configuring the
database.
The configuration files are described in the SNMP User's Manual.
EXPORTS
configure(ConfDir) -> void()
Types:
ConfDir = string()
This function is called from the supervisor at system start-up.
Inserts all data in the configuration files into the database
and destroys all old rows with StorageType volatile. The rows
created from the configuration file will have StorageType non-
Volatile.
All snmp counters are set to zero.
If an error is found in the configuration file, it is reported
using the function config_err/2 of the error report module, and
the function fails with the reason configuration_error.
ConfDir is a string which points to the directory where the con-
figuration files are found.
The configuration file read is: standard.conf.
inc(Name) -> void()
inc(Name, N) -> void()
Types:
Name = atom()
N = integer()
Increments a variable in the MIB with N, or one if N is not
specified.
reconfigure(ConfDir) -> void()
Types:
ConfDir = string()
Inserts all data in the configuration files into the database
and destroys all old data, including the rows with StorageType
nonVolatile. The rows created from the configuration file will
have StorageType nonVolatile.
Thus, the data in the SNMP-STANDARD-MIB and SNMPv2-MIB, after
this function has been called, is from the configuration files.
All snmp counters are set to zero.
If an error is found in the configuration file, it is reported
using the function config_err/2 of the error report module, and
the function fails with the reason configuration_error.
ConfDir is a string which points to the directory where the con-
figuration files are found.
The configuration file read is: standard.conf.
reset() -> void()
Resets all snmp counters to 0.
sys_up_time() -> Time
Types:
Time = int()
Gets the system up time in hundredth of a second.
Ericsson AB snmp 5.6 snmp_standard_mib(3erl)