sane-hpsj5s(5) SANE Scanner Access Now Easy sane-hpsj5s(5)
NAME
sane-hpsj5s - SANE backend for HP ScanJet 5S sheet-fed scanner
DESCRIPTION
The sane-hpsj5s library implements a SANE (Scanner Access Now Easy)
backend that provides access to a parallel port Hewlett-Packard ScanJet
5S scanner.
IMPORTANT: this is alpha code. Don't expect this to work correctly.
Many functions are missing, others contain errors. In some cases, your
computer might even hang. It cannot be excluded (although I consider it
extremely improbable) that your scanner will be damaged.
LIMITATIONS: For now this backend works only on Linux. This limitation
is due to dependence on the libieee1284 library. If your system sup-
ports libieee1284 too, this backend should work. If you ported li-
bieee1284 for your platform, please let me know. Your system should
support EPP (or EPP+ECP ) mode to operate this scanner. Future versions
will support ECP and SPP (Nibble and Byte) modes also. It's planned to
support scanners not only at daisy-chain position 0, but anywhere. Sup-
port for multiple scanners could be implemented too.
Current version implements only gray scale scanning. True Color and B/W
modes are not supported for now.
That said, TESTERS ARE WELCOME. Send your bug reports and comments to
Max Vorobiev <pcwizard@yandex.ru>.
DEVICE NAMES
This backend expects device names of the form:
special
Where special is the parallel port name in form, libieee1284 expects.
It seems to be system dependent. Under Linux it's parport0, parport1,
etc.
CONFIGURATION
The contents of the hpsj5s.conf file is a list of parport names that
correspond to HP ScanJet 5S scanners. Empty lines and lines starting
with a hash mark (#) are ignored. Only one device name can be listed
in hpsj5s.conf for this moment. Future versions will support daisy
chain selection.
TIPS
It seems that HP ScanJet 5S scanner uses software noise correction.
This feature is not implemented for now. So does gamma correction and
calibration. I'll handle it in future versions. Native resolution for
this scanner is 300 DPI. Other modes could be jagged in some ways.
FILES
@CONFIGDIR@/hpsj5s.conf
The backend configuration file (see also description of
SANE_CONFIG_DIR below).
@LIBDIR@/libsane-hpsj5s.a
The static library implementing this backend.
@LIBDIR@/libsane-hpsj5s.so
The shared library implementing this backend (present on systems
that support dynamic loading).
ENVIRONMENT
SANE_CONFIG_DIR
This environment variable specifies the list of directories that
may contain the configuration file. Under UNIX, the directories
are separated by a colon (`:'), under OS/2, they are separated
by a semi-colon (`;'). If this variable is not set, the config-
uration file is searched in two default directories: first, the
current working directory (".") and then in @CONFIGDIR@. If the
value of the environment variable ends with the directory sepa-
rator character, then the default directories are searched after
the explicitly specified directories. For example, setting
SANE_CONFIG_DIR to "/tmp/config:" would result in directories
"tmp/config", ".", and "@CONFIGDIR@" being searched (in this or-
der).
SEE ALSO
sane(7)
http://hpsj5s.sourceforge.net
http://cyberelk.net/tim/libieee1284
AUTHOR
Max Vorobiev
Man page mostly based on canon.man
@PACKAGEVERSION@ 13 Jul 2008 sane-hpsj5s(5)