sane-magicolor(5) SANE Scanner Access Now Easy sane-magicolor(5)
NAME
sane-magicolor - SANE backend for KONICA MINOLTA magicolor scanners
DESCRIPTION
The sane-magicolor backend supports KONICA MINOLTA magicolor scanners
connected via USB or LAN. Currently, only the magicolor 1690MF device
is supported, no other devices with the same scanning protocol are
known.
SUPPORTED DEVICES
The following scanner should work with this backend:
Device Details
-----------------------------
Vendor: KONICA MINOLTA
Model: magicolor 1690MF
CONFIGURATION
This section describes the backend's configuration file entries. The
file is located at:
@CONFIGDIR@/magicolor.conf
For a proper setup, at least one of the following entries are needed:
net autodiscovery
net [IP ADDRESS] [DEVICE-ID]
usb
usb [VENDOR-ID] [DEVICE-ID]
FILES
@CONFIGDIR@/magicolor.conf
The backend configuration file
@LIBDIR@/libsane-magicolor.a
The static library implementing this backend.
@LIBDIR@/libsane-magicolor.so
The shared library implementing this backend (present on systems
that support dynamic loading).
ENVIRONMENT
SANE_CONFIG_DIR
This environment variable specifies the list of directories that
may contain the configuration file. Under UNIX, the directories
are separated by a colon (`:'), under OS/2, they are separated
by a semi-colon (`;'). If this variable is not set, the config-
uration file is searched in two default directories: first, the
current working directory (".") and then in @CONFIGDIR@. If the
value of the environment variable ends with the directory sepa-
rator character, then the default directories are searched after
the explicitly specified directories. For example, setting
SANE_CONFIG_DIR to "/tmp/config:" would result in directories
"/tmp/config", ".", and "@CONFIGDIR@" being searched (in this
order).
SANE_DEBUG_MAGICOLOR
If the library was compiled with debug support enabled, this en-
vironment variable controls the debug level for this backend.
Higher debug levels increase the verbosity of the output.
Example: export SANE_DEBUG_MAGICOLOR=127
To obtain debug messages from the backend, set this environment
variable before calling your favorite frontend (e.g. xscanim-
age).
Example: SANE_DEBUG_MAGICOLOR=65 xscanimage
KNOWN BUGS AND RESTRICTIONS
Large color scans may sometimes timeout due to unknown reasons (the
scanner simply stops returning data)
Cancelling large scans may lock up the scanner.
SEE ALSO
sane(7),
http://wiki.kainhofer.com/hardware/magicolor_scan
AUTHOR
Reinhold Kainhofer <reinhold@kainhofer.com>
@PACKAGEVERSION@ 10 Jan 2011 sane-magicolor(5)