UDEV(7) udev UDEV(7)
NAME
udev - Dynamic device management
DESCRIPTION
udev supplies the system software with device events, manages
permissions of device nodes and may create additional symlinks in the
/dev directory, or renames network interfaces. The kernel usually just
assigns unpredictable device names based on the order of discovery.
Meaningful symlinks or network device names provide a way to reliably
identify devices based on their properties or current configuration.
The udev daemon, systemd-udevd.service(8), receives device uevents
directly from the kernel whenever a device is added or removed from the
system, or it changes its state. When udev receives a device event, it
matches its configured set of rules against various device attributes
to identify the device. Rules that match may provide additional device
information to be stored in the udev database or to be used to create
meaningful symlink names.
All device information udev processes is stored in the udev database
and sent out to possible event subscribers. Access to all stored data
and the event sources is provided by the library libudev.
RULES FILES
The udev rules are read from the files located in the system rules
directories /lib/udev/rules.d and /usr/local/lib/udev/rules.d, the
volatile runtime directory /run/udev/rules.d and the local
administration directory /etc/udev/rules.d. All rules files are
collectively sorted and processed in lexical order, regardless of the
directories in which they live. However, files with identical filenames
replace each other. Files in /etc have the highest priority, files in
/run take precedence over files with the same name under /usr. This can
be used to override a system-supplied rules file with a local file if
needed; a symlink in /etc with the same name as a rules file in /lib,
pointing to /dev/null, disables the rules file entirely. Rule files
must have the extension .rules; other extensions are ignored.
Every line in the rules file contains at least one key-value pair.
Except for empty lines or lines beginning with "#", which are ignored.
There are two kinds of keys: match and assignment. If all match keys
match against their values, the rule gets applied and the assignment
keys get the specified values assigned.
A matching rule may rename a network interface, add symlinks pointing
to the device node, or run a specified program as part of the event
handling.
A rule consists of a comma-separated list of one or more key-value
pairs. Each key has a distinct operation, depending on the used
operator. Valid operators are:
"=="
Compare for equality.
"!="
Compare for inequality.
"="
Assign a value to a key. Keys that represent a list are reset and
only this single value is assigned.
"+="
Add the value to a key that holds a list of entries.
"-="
Remove the value from a key that holds a list of entries.
":="
Assign a value to a key finally; disallow any later changes.
The following key names can be used to match against device properties.
Some of the keys also match against properties of the parent devices in
sysfs, not only the device that has generated the event. If multiple
keys that match a parent device are specified in a single rule, all
these keys must match at one and the same parent device.
ACTION
Match the name of the event action.
DEVPATH
Match the devpath of the event device.
KERNEL
Match the name of the event device.
NAME
Match the name of a network interface. It can be used once the NAME
key has been set in one of the preceding rules.
SYMLINK
Match the name of a symlink targeting the node. It can be used once
a SYMLINK key has been set in one of the preceding rules. There may
be multiple symlinks; only one needs to match.
SUBSYSTEM
Match the subsystem of the event device.
DRIVER
Match the driver name of the event device. Only set this key for
devices which are bound to a driver at the time the event is
generated.
ATTR{filename}
Match sysfs attribute values of the event device. Trailing
whitespace in the attribute values is ignored unless the specified
match value itself contains trailing whitespace.
SYSCTL{kernel parameter}
Match a kernel parameter value.
KERNELS
Search the devpath upwards for a matching device name.
SUBSYSTEMS
Search the devpath upwards for a matching device subsystem name.
DRIVERS
Search the devpath upwards for a matching device driver name.
ATTRS{filename}
Search the devpath upwards for a device with matching sysfs
attribute values. If multiple ATTRS matches are specified, all of
them must match on the same device. Trailing whitespace in the
attribute values is ignored unless the specified match value itself
contains trailing whitespace.
TAGS
Search the devpath upwards for a device with matching tag.
ENV{key}
Match against a device property value.
CONST{key}
Match against a system-wide constant. Supported keys are:
"arch"
System's architecture. See ConditionArchitecture= in
systemd.unit(5) for possible values.
"virt"
System's virtualization environment. See systemd-detect-virt(1)
for possible values.
Unknown keys will never match.
TAG
Match against a device tag.
TEST{octal mode mask}
Test the existence of a file. An octal mode mask can be specified
if needed.
PROGRAM
Execute a program to determine whether there is a match; the key is
true if the program returns successfully. The device properties are
made available to the executed program in the environment. The
program's standard output is available in the RESULT key.
This can only be used for very short-running foreground tasks. For
details, see RUN.
RESULT
Match the returned string of the last PROGRAM call. This key can be
used in the same or in any later rule after a PROGRAM call.
Most of the fields support shell glob pattern matching and alternate
patterns. The following special characters are supported:
"*"
Matches zero or more characters.
"?"
Matches any single character.
"[]"
Matches any single character specified within the brackets. For
example, the pattern string "tty[SR]" would match either "ttyS" or
"ttyR". Ranges are also supported via the "-" character. For
example, to match on the range of all digits, the pattern "[0-9]"
could be used. If the first character following the "[" is a "!",
any characters not enclosed are matched.
"|"
Separates alternative patterns. For example, the pattern string
"abc|x*" would match either "abc" or "x*".
The following keys can get values assigned:
NAME
The name to use for a network interface. See systemd.link(5) for a
higher-level mechanism for setting the interface name. The name of
a device node cannot be changed by udev, only additional symlinks
can be created.
SYMLINK
The name of a symlink targeting the node. Every matching rule adds
this value to the list of symlinks to be created.
The set of characters to name a symlink is limited. Allowed
characters are "0-9A-Za-z#+-.:=@_/", valid UTF-8 character
sequences, and "\x00" hex encoding. All other characters are
replaced by a "_" character.
Multiple symlinks may be specified by separating the names by the
space character. In case multiple devices claim the same name, the
link always points to the device with the highest link_priority. If
the current device goes away, the links are re-evaluated and the
device with the next highest link_priority becomes the owner of the
link. If no link_priority is specified, the order of the devices
(and which one of them owns the link) is undefined.
Symlink names must never conflict with the kernel's default device
node names, as that would result in unpredictable behavior.
OWNER, GROUP, MODE
The permissions for the device node. Every specified value
overrides the compiled-in default value.
SECLABEL{module}
Applies the specified Linux Security Module label to the device
node.
ATTR{key}
The value that should be written to a sysfs attribute of the event
device.
SYSCTL{kernel parameter}
The value that should be written to kernel parameter.
ENV{key}
Set a device property value. Property names with a leading "." are
neither stored in the database nor exported to events or external
tools (run by, for example, the PROGRAM match key).
TAG
Attach a tag to a device. This is used to filter events for users
of libudev's monitor functionality, or to enumerate a group of
tagged devices. The implementation can only work efficiently if
only a few tags are attached to a device. It is only meant to be
used in contexts with specific device filter requirements, and not
as a general-purpose flag. Excessive use might result in
inefficient event handling.
RUN{type}
Add a program to the list of programs to be executed after
processing all the rules for a specific event, depending on "type":
"program"
Execute an external program specified as the assigned value. If
no absolute path is given, the program is expected to live in
/lib/udev; otherwise, the absolute path must be specified.
This is the default if no type is specified.
"builtin"
As program, but use one of the built-in programs rather than an
external one.
The program name and following arguments are separated by spaces.
Single quotes can be used to specify arguments with spaces.
This can only be used for very short-running foreground tasks.
Running an event process for a long period of time may block all
further events for this or a dependent device.
Starting daemons or other long-running processes is not appropriate
for udev; the forked processes, detached or not, will be
unconditionally killed after the event handling has finished.
Note that running programs that access the network or mount/unmount
filesystems is not allowed inside of udev rules, due to the default
sandbox that is enforced on systemd-udevd.service.
Please also note that ":=" and "=" are clearing both, program and
builtin commands.
In order to activate long-running processes from udev rules,
provide a service unit, and pull it in from a udev device using the
SYSTEMD_WANTS device property. See systemd.device(5) for details.
LABEL
A named label to which a GOTO may jump.
GOTO
Jumps to the next LABEL with a matching name.
IMPORT{type}
Import a set of variables as device properties, depending on
"type":
"program"
Execute an external program specified as the assigned value
and, if it returns successfully, import its output, which must
be in environment key format. Path specification,
command/argument separation, and quoting work like in RUN.
"builtin"
Similar to "program", but use one of the built-in programs
rather than an external one.
"file"
Import a text file specified as the assigned value, the content
of which must be in environment key format.
"db"
Import a single property specified as the assigned value from
the current device database. This works only if the database is
already populated by an earlier event.
"cmdline"
Import a single property from the kernel command line. For
simple flags the value of the property is set to "1".
"parent"
Import the stored keys from the parent device by reading the
database entry of the parent device. The value assigned to
IMPORT{parent} is used as a filter of key names to import (with
the same shell glob pattern matching used for comparisons).
This can only be used for very short-running foreground tasks. For
details see RUN.
OPTIONS
Rule and device options:
link_priority=value
Specify the priority of the created symlinks. Devices with
higher priorities overwrite existing symlinks of other devices.
The default is 0.
string_escape=none|replace
Usually, control and other possibly unsafe characters are
replaced in strings used for device naming. The mode of
replacement can be specified with this option.
static_node=
Apply the permissions specified in this rule to the static
device node with the specified name. Also, for every tag
specified in this rule, create a symlink in the directory
/run/udev/static_node-tags/tag pointing at the static device
node with the specified name. Static device node creation is
performed by systemd-tmpfiles before systemd-udevd is started.
The static nodes might not have a corresponding kernel device;
they are used to trigger automatic kernel module loading when
they are accessed.
watch
Watch the device node with inotify; when the node is closed
after being opened for writing, a change uevent is synthesized.
nowatch
Disable the watching of a device node with inotify.
db_persist
Set the flag (sticky bit) on the udev database entry of the
event device. Device properties are then kept in the database
even when udevadm info --cleanup-db is called. This option can
be useful in certain cases (e.g. Device Mapper devices) for
persisting device state on the transition from initramfs.
The NAME, SYMLINK, PROGRAM, OWNER, GROUP, MODE, SECLABEL, and RUN
fields support simple string substitutions. The RUN substitutions are
performed after all rules have been processed, right before the program
is executed, allowing for the use of device properties set by earlier
matching rules. For all other fields, substitutions are performed while
the individual rule is being processed. The available substitutions
are:
$kernel, %k
The kernel name for this device.
$number, %n
The kernel number for this device. For example, "sda3" has kernel
number "3".
$devpath, %p
The devpath of the device.
$id, %b
The name of the device matched while searching the devpath upwards
for SUBSYSTEMS, KERNELS, DRIVERS, and ATTRS.
$driver
The driver name of the device matched while searching the devpath
upwards for SUBSYSTEMS, KERNELS, DRIVERS, and ATTRS.
$attr{file}, %s{file}
The value of a sysfs attribute found at the device where all keys
of the rule have matched. If the matching device does not have such
an attribute, and a previous KERNELS, SUBSYSTEMS, DRIVERS, or ATTRS
test selected a parent device, then the attribute from that parent
device is used.
If the attribute is a symlink, the last element of the symlink
target is returned as the value.
$env{key}, %E{key}
A device property value.
$major, %M
The kernel major number for the device.
$minor, %m
The kernel minor number for the device.
$result, %c
The string returned by the external program requested with PROGRAM.
A single part of the string, separated by a space character, may be
selected by specifying the part number as an attribute: "%c{N}". If
the number is followed by the "+" character, this part plus all
remaining parts of the result string are substituted: "%c{N+}".
$parent, %P
The node name of the parent device.
$name
The current name of the device. If not changed by a rule, it is the
name of the kernel device.
$links
A space-separated list of the current symlinks. The value is only
set during a remove event or if an earlier rule assigned a value.
$root, %r
The udev_root value.
$sys, %S
The sysfs mount point.
$devnode, %N
The name of the device node.
%%
The "%" character itself.
$$
The "$" character itself.
SEE ALSO
systemd-udevd.service(8), udevadm(8), systemd.link(5)
systemd 245 UDEV(7)