EXIM4(8) System Manager's Manual EXIM4(8)
NAME
exim4 - a Mail Transfer Agent
SYNOPSIS
exim4 [options] arguments ...
mailq [options] arguments ...
rsmtp [options] arguments ...
rmail [options] arguments ...
runq [options] arguments ...
newaliases [options] arguments ...
DESCRIPTION
Exim is a mail transfer agent (MTA) developed at the University of Cam-
bridge. It is a large program with very many facilities. For a full
specification, see the reference manual. This man page contains only a
description of the command line options. It has been automatically gen-
erated from the reference manual source, hopefully without too much
mangling.
Like other MTAs, Exim replaces Sendmail, and is normally called by user
agents (MUAs) using the path /usr/sbin/sendmail when they submit mes-
sages for delivery (some operating systems use /usr/lib/sendmail). This
path is normally set up as a symbolic link to the Exim binary. It may
also be used by boot scripts to start the Exim daemon. Many of Exim's
command line options are compatible with Sendmail so that it can act as
a drop-in replacement.
DEFAULT ACTION
If no options are present that require a specific action (such as
starting the daemon or a queue runner, testing an address, receiving a
message in a specific format, or listing the queue), and there are no
arguments on the command line, Exim outputs a brief message about it-
self and exits.
However, if there is at least one command line argument, -bm (accept a
local message on the standard input, with the arguments specifying the
recipients) is assumed. Thus, for example, if Exim is installed in
/usr/sbin, you can send a message from the command line like this:
/usr/sbin/exim4 -i <recipient-address(es)>
<message content, including all the header lines>
CTRL-D
The -i option prevents a line containing just a dot from terminating
the message. Only an end-of-file (generated by typing CTRL-D if the in-
put is from a terminal) does so.
SETTING OPTIONS BY PROGRAM NAME
If an Exim binary is called using one of the names listed in this sec-
tion (typically via a symbolic link), certain options are assumed.
mailq Behave as if the option -bp were present before any other op-
tions. The -bp option requests a listing of the contents of the
mail queue on the standard output.
rsmtp Behaves as if the option -bS were present before any other op-
tions, for compatibility with Smail. The -bS option is used for
reading in a number of messages in batched SMTP format.
rmail Behave as if the -i and -oee options were present before any
other options, for compatibility with Smail. The name rmail is
used as an interface by some UUCP systems. The -i option speci-
fies that a dot on a line by itself does not terminate a
non-SMTP message; -oee requests that errors detected in non-SMTP
messages be reported by emailing the sender.
runq Behave as if the option -q were present before any other op-
tions, for compatibility with Smail. The -q option causes a sin-
gle queue runner process to be started. It processes the queue
once, then exits.
newaliases
Behave as if the option -bi were present before any other op-
tions, for compatibility with Sendmail. This option is used for
rebuilding Sendmail's alias file. Exim does not have the concept
of a single alias file, but can be configured to run a specified
command if called with the -bi option.
OPTIONS
-- This is a pseudo-option whose only purpose is to terminate
the options and therefore to cause subsequent command line
items to be treated as arguments rather than options, even if
they begin with hyphens.
--help This option causes Exim to output a few sentences stating
what it is. The same output is generated if the Exim binary
is called with no options and no arguments.
--version This option is an alias for -bV and causes version informa-
tion to be displayed.
-Ac -Am These options are used by Sendmail for selecting configu-
ration files and are ignored by Exim.
-B<type> This is a Sendmail option for selecting 7 or 8 bit process-
ing. Exim is 8-bit clean; it ignores this option.
-bd This option runs Exim as a daemon, awaiting incoming SMTP
connections. Usually the -bd option is combined with the
-q<time> option, to specify that the daemon should also ini-
tiate periodic queue runs.
The -bd option can be used only by an admin user. If either
of the -d (debugging) or -v (verifying) options are set, the
daemon does not disconnect from the controlling terminal.
When running this way, it can be stopped by pressing ctrl-C.
By default, Exim listens for incoming connections to the
standard SMTP port on all the host's running interfaces. How-
ever, it is possible to listen on other ports, on multiple
ports, and only on specific interfaces.
When a listening daemon is started without the use of -oX
(that is, without overriding the normal configuration), it
writes its process id to a file called /run/exim4/exim.pid.
This location can be overridden by setting PID_FILE_PATH in
Local/Makefile. The file is written while Exim is still run-
ning as root.
When -oX is used on the command line to start a listening
daemon, the process id is not written to the normal pid file
path. However, -oP can be used to specify a path on the com-
mand line if a pid file is required.
The SIGHUP signal can be used to cause the daemon to re-exe-
cute itself. This should be done whenever Exim's configura-
tion file, or any file that is incorporated into it by means
of the .include facility, is changed, and also whenever a new
version of Exim is installed. It is not necessary to do this
when other files that are referenced from the configuration
(for example, alias files) are changed, because these are
reread each time they are used.
-bdf This option has the same effect as -bd except that it never
disconnects from the controlling terminal, even when no de-
bugging is specified.
-be Run Exim in expansion testing mode. Exim discards its root
privilege, to prevent ordinary users from using this mode to
read otherwise inaccessible files. If no arguments are given,
Exim runs interactively, prompting for lines of data. Other-
wise, it processes each argument in turn.
If Exim was built with USE_READLINE=yes in Local/Makefile, it
tries to load the libreadline library dynamically whenever
the -be option is used without command line arguments. If
successful, it uses the readline() function, which provides
extensive line-editing facilities, for reading the test data.
A line history is supported.
Long expansion expressions can be split over several lines by
using backslash continuations. As in Exim's runtime configu-
ration, white space at the start of continuation lines is ig-
nored. Each argument or data line is passed through the
string expansion mechanism, and the result is output. Vari-
able values from the configuration file (for example, $qual-
ify_domain) are available, but no message-specific values
(such as $message_exim_id) are set, because no message is be-
ing processed (but see -bem and -Mset).
Note: If you use this mechanism to test lookups, and you
change the data files or databases you are using, you must
exit and restart Exim before trying the same lookup again.
Otherwise, because each Exim process caches the results of
lookups, you will just get the same result as before.
Macro processing is done on lines before string-expansion:
new macros can be defined and macros will be expanded. Be-
cause macros in the config file are often used for secrets,
those are only available to admin users.
-bem <filename>
This option operates like -be except that it must be followed
by the name of a file. For example:
exim4 -bem /tmp/testmessage
The file is read as a message (as if receiving a locally-sub-
mitted non-SMTP message) before any of the test expansions
are done. Thus, message-specific variables such as $mes-
sage_size and $header_from: are available. However, no Re-
ceived: header is added to the message. If the -t option is
set, recipients are read from the headers in the normal way,
and are shown in the $recipients variable. Note that recipi-
ents cannot be given on the command line, because further ar-
guments are taken as strings to expand (just like -be).
-bF <filename>
This option is the same as -bf except that it assumes that
the filter being tested is a system filter. The additional
commands that are available only in system filters are recog-
nized.
-bf <filename>
This option runs Exim in user filter testing mode; the file
is the filter file to be tested, and a test message must be
supplied on the standard input. If there are no message-de-
pendent tests in the filter, an empty file can be supplied.
If you want to test a system filter file, use -bF instead of
-bf. You can use both -bF and -bf on the same command, in or-
der to test a system filter and a user filter in the same
run. For example:
exim4 -bF /system/filter -bf /user/filter </test/message
This is helpful when the system filter adds header lines or
sets filter variables that are used by the user filter.
If the test filter file does not begin with one of the spe-
cial lines
# Exim filter
# Sieve filter
it is taken to be a normal .forward file, and is tested for
validity under that interpretation.
The result of an Exim command that uses -bf, provided no er-
rors are detected, is a list of the actions that Exim would
try to take if presented with the message for real. More de-
tails of filter testing are given in the separate document
entitled Exim's interfaces to mail filtering.
When testing a filter file, the envelope sender can be set by
the -f option, or by a "From " line at the start of the test
message. Various parameters that would normally be taken from
the envelope recipient address of the message can be set by
means of additional command line options (see the next four
options).
-bfd <domain>
This sets the domain of the recipient address when a filter
file is being tested by means of the -bf option. The default
is the value of $qualify_domain.
-bfl <local part>
This sets the local part of the recipient address when a fil-
ter file is being tested by means of the -bf option. The de-
fault is the username of the process that calls Exim. A local
part should be specified with any prefix or suffix stripped,
because that is how it appears to the filter when a message
is actually being delivered.
-bfp <prefix>
This sets the prefix of the local part of the recipient ad-
dress when a filter file is being tested by means of the -bf
option. The default is an empty prefix.
-bfs <suffix>
This sets the suffix of the local part of the recipient ad-
dress when a filter file is being tested by means of the -bf
option. The default is an empty suffix.
-bh <IP address>
This option runs a fake SMTP session as if from the given IP
address, using the standard input and output. The IP address
may include a port number at the end, after a full stop. For
example:
exim4 -bh 10.9.8.7.1234
exim4 -bh fe80::a00:20ff:fe86:a061.5678
When an IPv6 address is given, it is converted into canonical
form. In the case of the second example above, the value of
$sender_host_address after conversion to the canonical form
is fe80:0000:0000:0a00:20ff:fe86:a061.5678.
Comments as to what is going on are written to the standard
error file. These include lines beginning with "LOG" for any-
thing that would have been logged. This facility is provided
for testing configuration options for incoming messages, to
make sure they implement the required policy. For example,
you can test your relay controls using -bh.
Warning 1: You can test features of the configuration that
rely on ident (RFC 1413) information by using the -oMt op-
tion. However, Exim cannot actually perform an ident callout
when testing using -bh because there is no incoming SMTP con-
nection.
Warning 2: Address verification callouts are also skipped
when testing using -bh. If you want these callouts to occur,
use -bhc instead.
Messages supplied during the testing session are discarded,
and nothing is written to any of the real log files. There
may be pauses when DNS (and other) lookups are taking place,
and of course these may time out. The -oMi option can be used
to specify a specific IP interface and port if this is impor-
tant, and -oMaa and -oMai can be used to set parameters as if
the SMTP session were authenticated.
The exim_checkaccess utility is a "packaged" version of -bh
whose output just states whether a given recipient address
from a given host is acceptable or not.
Features such as authentication and encryption, where the
client input is not plain text, cannot easily be tested with
-bh. Instead, you should use a specialized SMTP test program
such as swaks.
-bhc <IP address>
This option operates in the same way as -bh, except that ad-
dress verification callouts are performed if required. This
includes consulting and updating the callout cache database.
-bi Sendmail interprets the -bi option as a request to rebuild
its alias file. Exim does not have the concept of a single
alias file, and so it cannot mimic this behaviour. However,
calls to /usr/lib/sendmail with the -bi option tend to appear
in various scripts such as NIS make files, so the option must
be recognized.
If -bi is encountered, the command specified by the bi_com-
mand configuration option is run, under the uid and gid of
the caller of Exim. If the -oA option is used, its value is
passed to the command as an argument. The command set by
bi_command may not contain arguments. The command can use the
exim_dbmbuild utility, or some other means, to rebuild alias
files if this is required. If the bi_command option is not
set, calling Exim with -bi is a no-op.
-bI:help We shall provide various options starting -bI: for querying
Exim for information. The output of many of these will be
intended for machine consumption. This one is not. The
-bI:help option asks Exim for a synopsis of supported options
beginning -bI:. Use of any of these options shall cause Exim
to exit after producing the requested output.
-bI:dscp This option causes Exim to emit an alphabetically sorted list
of all recognised DSCP names.
-bI:sieve This option causes Exim to emit an alphabetically sorted list
of all supported Sieve protocol extensions on stdout, one per
line. This is anticipated to be useful for ManageSieve (RFC
5804) implementations, in providing that protocol's SIEVE ca-
pability response line. As the precise list may depend upon
compile-time build options, which this option will adapt to,
this is the only way to guarantee a correct response.
-bm This option runs an Exim receiving process that accepts an
incoming, locally-generated message on the standard input.
The recipients are given as the command arguments (except
when -t is also present - see below). Each argument can be a
comma-separated list of RFC 2822 addresses. This is the de-
fault option for selecting the overall action of an Exim
call; it is assumed if no other conflicting option is
present.
If any addresses in the message are unqualified (have no do-
main), they are qualified by the values of the qualify_domain
or qualify_recipient options, as appropriate. The -bnq option
(see below) provides a way of suppressing this for special
cases.
Policy checks on the contents of local messages can be en-
forced by means of the non-SMTP ACL.
The return code is zero if the message is successfully ac-
cepted. Otherwise, the action is controlled by the -oex op-
tion setting - see below.
The format of the message must be as defined in RFC 2822, ex-
cept that, for compatibility with Sendmail and Smail, a line
in one of the forms
From sender Fri Jan 5 12:55 GMT 1997
From sender Fri, 5 Jan 97 12:55:01
(with the weekday optional, and possibly with additional text
after the date) is permitted to appear at the start of the
message. There appears to be no authoritative specification
of the format of this line. Exim recognizes it by matching
against the regular expression defined by the uucp_from_pat-
tern option, which can be changed if necessary.
The specified sender is treated as if it were given as the
argument to the -f option, but if a -f option is also
present, its argument is used in preference to the address
taken from the message. The caller of Exim must be a trusted
user for the sender of a message to be set in this way.
-bmalware <filename>
This debugging option causes Exim to scan the given file or
directory (depending on the used scanner interface), using
the malware scanning framework. The option of av_scanner in-
fluences this option, so if av_scanner's value is dependent
upon an expansion then the expansion should have defaults
which apply to this invocation. ACLs are not invoked, so if
av_scanner references an ACL variable then that variable will
never be populated and -bmalware will fail.
Exim will have changed working directory before resolving the
filename, so using fully qualified pathnames is advisable.
Exim will be running as the Exim user when it tries to open
the file, rather than as the invoking user. This option re-
quires admin privileges.
The -bmalware option will not be extended to be more gener-
ally useful, there are better tools for file-scanning. This
option exists to help administrators verify their Exim and AV
scanner configuration.
-bnq By default, Exim automatically qualifies unqualified ad-
dresses (those without domains) that appear in messages that
are submitted locally (that is, not over TCP/IP). This quali-
fication applies both to addresses in envelopes, and ad-
dresses in header lines. Sender addresses are qualified using
qualify_domain, and recipient addresses using qualify_recipi-
ent (which defaults to the value of qualify_domain).
Sometimes, qualification is not wanted. For example, if -bS
(batch SMTP) is being used to re-submit messages that origi-
nally came from remote hosts after content scanning, you
probably do not want to qualify unqualified addresses in
header lines. (Such lines will be present only if you have
not enabled a header syntax check in the appropriate ACL.)
The -bnq option suppresses all qualification of unqualified
addresses in messages that originate on the local host. When
this is used, unqualified addresses in the envelope provoke
errors (causing message rejection) and unqualified addresses
in header lines are left alone.
-bP If this option is given with no arguments, it causes the val-
ues of all Exim's main configuration options to be written to
the standard output. The values of one or more specific op-
tions can be requested by giving their names as arguments,
for example:
exim4 -bP qualify_domain hold_domains
However, any option setting that is preceded by the word
"hide" in the configuration file is not shown in full, except
to an admin user. For other users, the output is as in this
example:
mysql_servers = <value not displayable>
If config is given as an argument, the config is output, as
it was parsed, any include file resolved, any comment re-
moved.
If config_file is given as an argument, the name of the run-
time configuration file is output. (configure_file works too,
for backward compatibility.) If a list of configuration
files was supplied, the value that is output here is the name
of the file that was actually used.
If the -n flag is given, then for most modes of -bP operation
the name will not be output.
If log_file_path or pid_file_path are given, the names of the
directories where log files and daemon pid files are written
are output, respectively. If these values are unset, log
files are written in a sub-directory of the spool directory
called log, and the pid file is written directly into the
spool directory.
If -bP is followed by a name preceded by +, for example,
exim4 -bP +local_domains
it searches for a matching named list of any type (domain,
host, address, or local part) and outputs what it finds.
If one of the words router, transport, or authenticator is
given, followed by the name of an appropriate driver in-
stance, the option settings for that driver are output. For
example:
exim4 -bP transport local_delivery
The generic driver options are output first, followed by the
driver's private options. A list of the names of drivers of a
particular type can be obtained by using one of the words
router_list, transport_list, or authenticator_list, and a
complete list of all drivers with their option settings can
be obtained by using routers, transports, or authenticators.
If environment is given as an argument, the set of environ-
ment variables is output, line by line. Using the -n flag
suppresses the value of the variables.
If invoked by an admin user, then macro, macro_list and
macros are available, similarly to the drivers. Because
macros are sometimes used for storing passwords, this option
is restricted. The output format is one item per line. For
the "-bP macro <name>" form, if no such macro is found the
exit status will be nonzero.
-bp This option requests a listing of the contents of the mail
queue on the standard output. If the -bp option is followed
by a list of message ids, just those messages are listed. By
default, this option can be used only by an admin user. How-
ever, the queue_list_requires_admin option can be set false
to allow any user to see the queue.
Each message in the queue is displayed as in the following
example:
25m 2.9K 0t5C6f-0000c8-00 <alice@wonderland.fict.example>
red.king@looking-glass.fict.example
<other addresses>
The first line contains the length of time the message has
been in the queue (in this case 25 minutes), the size of the
message (2.9K), the unique local identifier for the message,
and the message sender, as contained in the envelope. For
bounce messages, the sender address is empty, and appears as
"<>". If the message was submitted locally by an untrusted
user who overrode the default sender address, the user's lo-
gin name is shown in parentheses before the sender address.
If the message is frozen (attempts to deliver it are sus-
pended) then the text "*** frozen ***" is displayed at the
end of this line.
The recipients of the message (taken from the envelope, not
the headers) are displayed on subsequent lines. Those ad-
dresses to which the message has already been delivered are
marked with the letter D. If an original address gets ex-
panded into several addresses via an alias or forward file,
the original is displayed with a D only when deliveries for
all of its child addresses are complete.
-bpa This option operates like -bp, but in addition it shows de-
livered addresses that were generated from the original top
level address(es) in each message by alias or forwarding op-
erations. These addresses are flagged with "+D" instead of
just "D".
-bpc This option counts the number of messages in the queue, and
writes the total to the standard output. It is restricted to
admin users, unless queue_list_requires_admin is set false.
-bpr This option operates like -bp, but the output is not sorted
into chronological order of message arrival. This can speed
it up when there are lots of messages in the queue, and is
particularly useful if the output is going to be post-pro-
cessed in a way that doesn't need the sorting.
-bpra This option is a combination of -bpr and -bpa.
-bpru This option is a combination of -bpr and -bpu.
-bpu This option operates like -bp but shows only undelivered
top-level addresses for each message displayed. Addresses
generated by aliasing or forwarding are not shown, unless the
message was deferred after processing by a router with the
one_time option set.
-brt This option is for testing retry rules, and it must be fol-
lowed by up to three arguments. It causes Exim to look for a
retry rule that matches the values and to write it to the
standard output. For example:
exim4 -brt bach.comp.mus.example
Retry rule: *.comp.mus.example F,2h,15m; F,4d,30m;
The first argument, which is required, can be a complete ad-
dress in the form local_part@domain, or it can be just a do-
main name. If the second argument contains a dot, it is in-
terpreted as an optional second domain name; if no retry rule
is found for the first argument, the second is tried. This
ties in with Exim's behaviour when looking for retry rules
for remote hosts - if no rule is found that matches the host,
one that matches the mail domain is sought. Finally, an argu-
ment that is the name of a specific delivery error, as used
in setting up retry rules, can be given. For example:
exim4 -brt haydn.comp.mus.example quota_3d
Retry rule: *@haydn.comp.mus.example quota_3d F,1h,15m
-brw This option is for testing address rewriting rules, and it
must be followed by a single argument, consisting of either a
local part without a domain, or a complete address with a
fully qualified domain. Exim outputs how this address would
be rewritten for each possible place it might appear.
-bS This option is used for batched SMTP input, which is an al-
ternative interface for non-interactive local message submis-
sion. A number of messages can be submitted in a single run.
However, despite its name, this is not really SMTP input.
Exim reads each message's envelope from SMTP commands on the
standard input, but generates no responses. If the caller is
trusted, or untrusted_set_sender is set, the senders in the
SMTP MAIL commands are believed; otherwise the sender is al-
ways the caller of Exim.
The message itself is read from the standard input, in SMTP
format (leading dots doubled), terminated by a line contain-
ing just a single dot. An error is provoked if the terminat-
ing dot is missing. A further message may then follow.
As for other local message submissions, the contents of in-
coming batch SMTP messages can be checked using the non-SMTP
ACL. Unqualified addresses are automatically qualified using
qualify_domain and qualify_recipient, as appropriate, unless
the -bnq option is used.
Some other SMTP commands are recognized in the input. HELO
and EHLO act as RSET; VRFY, EXPN, ETRN, and HELP act as NOOP;
QUIT quits, ignoring the rest of the standard input.
If any error is encountered, reports are written to the stan-
dard output and error streams, and Exim gives up immediately.
The return code is 0 if no error was detected; it is 1 if one
or more messages were accepted before the error was detected;
otherwise it is 2.
-bs This option causes Exim to accept one or more messages by
reading SMTP commands on the standard input, and producing
SMTP replies on the standard output. SMTP policy controls, as
defined in ACLs are applied. Some user agents use this in-
terface as a way of passing locally-generated messages to the
MTA.
In this usage, if the caller of Exim is trusted, or un-
trusted_set_sender is set, the senders of messages are taken
from the SMTP MAIL commands. Otherwise the content of these
commands is ignored and the sender is set up as the calling
user. Unqualified addresses are automatically qualified using
qualify_domain and qualify_recipient, as appropriate, unless
the -bnq option is used.
The -bs option is also used to run Exim from inetd, as an al-
ternative to using a listening daemon. Exim can distinguish
the two cases by checking whether the standard input is a
TCP/IP socket. When Exim is called from inetd, the source of
the mail is assumed to be remote, and the comments above con-
cerning senders and qualification do not apply. In this situ-
ation, Exim behaves in exactly the same way as it does when
receiving a message via the listening daemon.
-bt This option runs Exim in address testing mode, in which each
argument is taken as a recipient address to be tested for de-
liverability. The results are written to the standard output.
If a test fails, and the caller is not an admin user, no de-
tails of the failure are output, because these might contain
sensitive information such as usernames and passwords for
database lookups.
If no arguments are given, Exim runs in an interactive man-
ner, prompting with a right angle bracket for addresses to be
tested.
Unlike the -be test option, you cannot arrange for Exim to
use the readline() function, because it is running as root
and there are security issues.
Each address is handled as if it were the recipient address
of a message (compare the -bv option). It is passed to the
routers and the result is written to the standard output.
However, any router that has no_address_test set is bypassed.
This can make -bt easier to use for genuine routing tests if
your first router passes everything to a scanner program.
The return code is 2 if any address failed outright; it is 1
if no address failed outright but at least one could not be
resolved for some reason. Return code 0 is given only when
all addresses succeed.
Note: When actually delivering a message, Exim removes dupli-
cate recipient addresses after routing is complete, so that
only one delivery takes place. This does not happen when
testing with -bt; the full results of routing are always
shown.
Warning: -bt can only do relatively simple testing. If any of
the routers in the configuration makes any tests on the
sender address of a message, you can use the -f option to set
an appropriate sender when running -bt tests. Without it, the
sender is assumed to be the calling user at the default qual-
ifying domain. However, if you have set up (for example)
routers whose behaviour depends on the contents of an incom-
ing message, you cannot test those conditions using -bt. The
-N option provides a possible way of doing such tests.
-bV This option causes Exim to write the current version number,
compilation number, and compilation date of the exim4 binary
to the standard output. It also lists the DBM library that
is being used, the optional modules (such as specific lookup
types), the drivers that are included in the binary, and the
name of the runtime configuration file that is in use.
As part of its operation, -bV causes Exim to read and syntax
check its configuration file. However, this is a static check
only. It cannot check values that are to be expanded. For ex-
ample, although a misspelt ACL verb is detected, an error in
the verb's arguments is not. You cannot rely on -bV alone to
discover (for example) all the typos in the configuration;
some realistic testing is needed. The -bh and -N options pro-
vide more dynamic testing facilities.
-bv This option runs Exim in address verification mode, in which
each argument is taken as a recipient address to be verified
by the routers. (This does not involve any verification call-
outs). During normal operation, verification happens mostly
as a consequence processing a verify condition in an ACL. If
you want to test an entire ACL, possibly including callouts,
see the -bh and -bhc options.
If verification fails, and the caller is not an admin user,
no details of the failure are output, because these might
contain sensitive information such as usernames and passwords
for database lookups.
If no arguments are given, Exim runs in an interactive man-
ner, prompting with a right angle bracket for addresses to be
verified.
Unlike the -be test option, you cannot arrange for Exim to
use the readline() function, because it is running as exim4
and there are security issues.
Verification differs from address testing (the -bt option) in
that routers that have no_verify set are skipped, and if the
address is accepted by a router that has fail_verify set,
verification fails. The address is verified as a recipient if
-bv is used; to test verification for a sender address, -bvs
should be used.
If the -v option is not set, the output consists of a single
line for each address, stating whether it was verified or
not, and giving a reason in the latter case. Without -v, gen-
erating more than one address by redirection causes verifica-
tion to end successfully, without considering the generated
addresses. However, if just one address is generated, pro-
cessing continues, and the generated address must verify suc-
cessfully for the overall verification to succeed.
When -v is set, more details are given of how the address has
been handled, and in the case of address redirection, all the
generated addresses are also considered. Verification may
succeed for some and fail for others.
The return code is 2 if any address failed outright; it is 1
if no address failed outright but at least one could not be
resolved for some reason. Return code 0 is given only when
all addresses succeed.
If any of the routers in the configuration makes any tests on
the sender address of a message, you should use the -f option
to set an appropriate sender when running -bv tests. Without
it, the sender is assumed to be the calling user at the de-
fault qualifying domain.
-bvs This option acts like -bv, but verifies the address as a
sender rather than a recipient address. This affects any
rewriting and qualification that might happen.
-bw This option runs Exim as a daemon, awaiting incoming SMTP
connections, similarly to the -bd option. All port specifi-
cations on the command-line and in the configuration file are
ignored. Queue-running may not be specified.
In this mode, Exim expects to be passed a socket as fd 0
(stdin) which is listening for connections. This permits the
system to start up and have inetd (or equivalent) listen on
the SMTP ports, starting an Exim daemon for each port only
when the first connection is received.
If the option is given as -bw<time> then the time is a time-
out, after which the daemon will exit, which should cause in-
etd to listen once more.
-C <filelist>
This option causes Exim to find the runtime configuration
file from the given list instead of from the list specified
by the CONFIGURE_FILE compile-time setting. Usually, the list
will consist of just a single filename, but it can be a
colon-separated list of names. In this case, the first file
that exists is used. Failure to open an existing file stops
Exim from proceeding any further along the list, and an error
is generated.
When this option is used by a caller other than root, and the
list is different from the compiled-in list, Exim gives up
its root privilege immediately, and runs with the real and
effective uid and gid set to those of the caller. However,
if a TRUSTED_CONFIG_LIST file is defined in Local/Makefile,
that file contains a list of full pathnames, one per line,
for configuration files which are trusted. Root privilege is
retained for any configuration file so listed, as long as the
caller is the Exim user (or the user specified in the CONFIG-
URE_OWNER option, if any), and as long as the configuration
file is not writeable by inappropriate users or groups.
Leaving TRUSTED_CONFIG_LIST unset precludes the possibility
of testing a configuration using -C right through message re-
ception and delivery, even if the caller is root. The recep-
tion works, but by that time, Exim is running as the Exim
user, so when it re-executes to regain privilege for the de-
livery, the use of -C causes privilege to be lost. However,
root can test reception and delivery using two separate com-
mands (one to put a message in the queue, using -odq, and an-
other to do the delivery, using -M).
If ALT_CONFIG_PREFIX is defined in Local/Makefile, it speci-
fies a prefix string with which any file named in a -C com-
mand line option must start. In addition, the filename must
not contain the sequence /../. However, if the value of the
-C option is identical to the value of CONFIGURE_FILE in Lo-
cal/Makefile, Exim ignores -C and proceeds as usual. There is
no default setting for ALT_CONFIG_PREFIX; when it is unset,
any filename can be used with -C.
ALT_CONFIG_PREFIX can be used to confine alternative configu-
ration files to a directory to which only root has access.
This prevents someone who has broken into the Exim account
from running a privileged Exim with an arbitrary configura-
tion file.
The -C facility is useful for ensuring that configuration
files are syntactically correct, but cannot be used for test
deliveries, unless the caller is privileged, or unless it is
an exotic configuration that does not require privilege. No
check is made on the owner or group of the files specified by
this option.
-D<macro>=<value>
This option can be used to override macro definitions in the
configuration file. However, like -C, if it is used by an un-
privileged caller, it causes Exim to give up its root privi-
lege. If DISABLE_D_OPTION is defined in Local/Makefile, the
use of -D is completely disabled, and its use causes an imme-
diate error exit.
If WHITELIST_D_MACROS is defined in Local/Makefile then it
should be a colon-separated list of macros which are consid-
ered safe and, if -D only supplies macros from this list, and
the values are acceptable, then Exim will not give up root
privilege if the caller is root, the Exim run-time user, or
the CONFIGURE_OWNER, if set. This is a transition mechanism
and is expected to be removed in the future. Acceptable val-
ues for the macros satisfy the regexp: ^[A-Za-z0-9_/.-]*$
The entire option (including equals sign if present) must all
be within one command line item. -D can be used to set the
value of a macro to the empty string, in which case the
equals sign is optional. These two commands are synonymous:
exim4 -DABC ...
exim4 -DABC= ...
To include spaces in a macro definition item, quotes must be
used. If you use quotes, spaces are permitted around the
macro name and the equals sign. For example:
exim4 '-D ABC = something' ...
-D may be repeated up to 10 times on a command line. Only
macro names up to 22 letters long can be set.
-d<debug options>
This option causes debugging information to be written to the
standard error stream. It is restricted to admin users be-
cause debugging output may show database queries that contain
password information. Also, the details of users' filter
files should be protected. If a non-admin user uses -d, Exim
writes an error message to the standard error stream and ex-
its with a non-zero return code.
When -d is used, -v is assumed. If -d is given on its own, a
lot of standard debugging data is output. This can be re-
duced, or increased to include some more rarely needed infor-
mation, by directly following -d with a string made up of
names preceded by plus or minus characters. These add or re-
move sets of debugging data, respectively. For example,
-d+filter adds filter debugging, whereas -d-all+filter se-
lects only filter debugging. Note that no spaces are allowed
in the debug setting. The available debugging categories are:
acl ACL interpretation
auth authenticators
deliver general delivery logic
dns DNS lookups (see also resolver)
dnsbl DNS black list (aka RBL) code
exec arguments for execv() calls
expand detailed debugging for string expansions
filter filter handling
hints_lookup hints data lookups
host_lookup all types of name-to-IP address handling
ident ident lookup
interface lists of local interfaces
lists matching things in lists
load system load checks
local_scan can be used by local_scan()
lookup general lookup code and all lookups
memory memory handling
noutf8 modifier: avoid UTF-8 line-drawing
pid modifier: add pid to debug output lines
process_info setting info for the process log
queue_run queue runs
receive general message reception logic
resolver turn on the DNS resolver's debugging output
retry retry handling
rewrite address rewriting
route address routing
timestamp modifier: add timestamp to debug output
lines
tls TLS logic
transport transports
uid changes of uid/gid and looking up uid/gid
verify address verification logic
all almost all of the above (see below), and
also -v
The all option excludes memory when used as +all, but in-
cludes it for -all. The reason for this is that +all is some-
thing that people tend to use when generating debug output
for Exim maintainers. If +memory is included, an awful lot of
output that is very rarely of interest is generated, so it
now has to be explicitly requested. However, -all does turn
everything off.
The resolver option produces output only if the DNS resolver
was compiled with DEBUG enabled. This is not the case in some
operating systems. Also, unfortunately, debugging output from
the DNS resolver is written to stdout rather than stderr.
The default (-d with no argument) omits expand, filter, in-
terface, load, memory, pid, resolver, and timestamp. How-
ever, the pid selector is forced when debugging is turned on
for a daemon, which then passes it on to any re-executed Ex-
ims. Exim also automatically adds the pid to debug lines when
several remote deliveries are run in parallel.
The timestamp selector causes the current time to be inserted
at the start of all debug output lines. This can be useful
when trying to track down delays in processing.
The noutf8 selector disables the use of UTF-8 line-drawing
characters to group related information. When disabled.
ascii-art is used instead. Using the +all option does not
set this modifier,
If the debug_print option is set in any driver, it produces
output whenever any debugging is selected, or if -v is used.
-dd<debug options>
This option behaves exactly like -d except when used on a
command that starts a daemon process. In that case, debugging
is turned off for the subprocesses that the daemon creates.
Thus, it is useful for monitoring the behaviour of the daemon
without creating as much output as full debugging does.
-dropcr This is an obsolete option that is now a no-op. It used to
affect the way Exim handled CR and LF characters in incoming
messages.
-E This option specifies that an incoming message is a lo-
cally-generated delivery failure report. It is used inter-
nally by Exim when handling delivery failures and is not in-
tended for external use. Its only effect is to stop Exim gen-
erating certain messages to the postmaster, as otherwise mes-
sage cascades could occur in some situations. As part of the
same option, a message id may follow the characters -E. If it
does, the log entry for the receipt of the new message con-
tains the id, following "R=", as a cross-reference.
-ex There are a number of Sendmail options starting with -oe
which seem to be called by various programs without the lead-
ing o in the option. For example, the vacation program uses
-eq. Exim treats all options of the form -ex as synonymous
with the corresponding -oex options.
-F <string>
This option sets the sender's full name for use when a lo-
cally-generated message is being accepted. In the absence of
this option, the user's gecos entry from the password data is
used. As users are generally permitted to alter their gecos
entries, no security considerations are involved. White space
between -F and the <string> is optional.
-f <address>
This option sets the address of the envelope sender of a lo-
cally-generated message (also known as the return path). The
option can normally be used only by a trusted user, but un-
trusted_set_sender can be set to allow untrusted users to use
it.
Processes running as root or the Exim user are always
trusted. Other trusted users are defined by the trusted_users
or trusted_groups options. In the absence of -f, or if the
caller is not trusted, the sender of a local message is set
to the caller's login name at the default qualify domain.
There is one exception to the restriction on the use of -f:
an empty sender can be specified by any user, trusted or not,
to create a message that can never provoke a bounce. An empty
sender can be specified either as an empty string, or as a
pair of angle brackets with nothing between them, as in these
examples of shell commands:
exim4 -f '<>' user@domain
exim4 -f "" user@domain
In addition, the use of -f is not restricted when testing a
filter file with -bf or when testing or verifying addresses
using the -bt or -bv options.
Allowing untrusted users to change the sender address does
not of itself make it possible to send anonymous mail. Exim
still checks that the From: header refers to the local user,
and if it does not, it adds a Sender: header, though this can
be overridden by setting no_local_from_check.
White space between -f and the <address> is optional (that
is, they can be given as two arguments or one combined argu-
ment). The sender of a locally-generated message can also be
set (when permitted) by an initial "From " line in the mes-
sage - see the description of -bm above - but if -f is also
present, it overrides "From ".
-G This option is equivalent to an ACL applying:
control = suppress_local_fixups
for every message received. Note that Sendmail will complain
about such bad formatting, where Exim silently just does not
fix it up. This may change in future.
As this affects audit information, the caller must be a
trusted user to use this option.
-h <number>
This option is accepted for compatibility with Sendmail, but
has no effect. (In Sendmail it overrides the "hop count" ob-
tained by counting Received: headers.)
-i This option, which has the same effect as -oi, specifies that
a dot on a line by itself should not terminate an incoming,
non-SMTP message. I can find no documentation for this option
in Solaris 2.4 Sendmail, but the mailx command in Solaris 2.4
uses it. See also -ti.
-L <tag> This option is equivalent to setting syslog_processname in
the config file and setting log_file_path to syslog. Its use
is restricted to administrators. The configuration file has
to be read and parsed, to determine access rights, before
this is set and takes effect, so early configuration file er-
rors will not honour this flag.
The tag should not be longer than 32 characters.
-M <message id> <message id> ...
This option requests Exim to run a delivery attempt on each
message in turn. If any of the messages are frozen, they are
automatically thawed before the delivery attempt. The set-
tings of queue_domains, queue_smtp_domains, and hold_domains
are ignored.
Retry hints for any of the addresses are overridden - Exim
tries to deliver even if the normal retry time has not yet
been reached. This option requires the caller to be an admin
user. However, there is an option called prod_requires_admin
which can be set false to relax this restriction (and also
the same requirement for the -q, -R, and -S options).
The deliveries happen synchronously, that is, the original
Exim process does not terminate until all the delivery at-
tempts have finished. No output is produced unless there is a
serious error. If you want to see what is happening, use the
-v option as well, or inspect Exim's main log.
-Mar <message id> <address> <address> ...
This option requests Exim to add the addresses to the list of
recipients of the message ("ar" for "add recipients"). The
first argument must be a message id, and the remaining ones
must be email addresses. However, if the message is active
(in the middle of a delivery attempt), it is not altered.
This option can be used only by an admin user.
-MC <transport> <hostname> <sequence number> <message id>
This option is not intended for use by external callers. It
is used internally by Exim to invoke another instance of it-
self to deliver a waiting message using an existing SMTP con-
nection, which is passed as the standard input. This must be
the final option, and the caller must be root or the Exim
user in order to use it.
-MCA This option is not intended for use by external callers. It
is used internally by Exim in conjunction with the -MC op-
tion. It signifies that the connection to the remote host has
been authenticated.
-MCD This option is not intended for use by external callers. It
is used internally by Exim in conjunction with the -MC op-
tion. It signifies that the remote host supports the ESMTP
DSN extension.
-MCd This option is not intended for use by external callers. It
is used internally by Exim in conjunction with the -d option
to pass on an information string on the purpose of the
process.
-MCG <queue name>
This option is not intended for use by external callers. It
is used internally by Exim in conjunction with the -MC op-
tion. It signifies that an alternate queue is used, named by
the following argument.
-MCK This option is not intended for use by external callers. It
is used internally by Exim in conjunction with the -MC op-
tion. It signifies that a remote host supports the ESMTP
CHUNKING extension.
-MCP This option is not intended for use by external callers. It
is used internally by Exim in conjunction with the -MC op-
tion. It signifies that the server to which Exim is connected
supports pipelining.
-MCQ <process id> <pipe fd>
This option is not intended for use by external callers. It
is used internally by Exim in conjunction with the -MC option
when the original delivery was started by a queue runner. It
passes on the process id of the queue runner, together with
the file descriptor number of an open pipe. Closure of the
pipe signals the final completion of the sequence of pro-
cesses that are passing messages through the same SMTP con-
nection.
-MCS This option is not intended for use by external callers. It
is used internally by Exim in conjunction with the -MC op-
tion, and passes on the fact that the ESMTP SIZE option
should be used on messages delivered down the existing con-
nection.
-MCT This option is not intended for use by external callers. It
is used internally by Exim in conjunction with the -MC op-
tion, and passes on the fact that the host to which Exim is
connected supports TLS encryption.
-MCt <IP address> <port> <cipher>
This option is not intended for use by external callers. It
is used internally by Exim in conjunction with the -MC op-
tion, and passes on the fact that the connection is being
proxied by a parent process for handling TLS encryption. The
arguments give the local address and port being proxied, and
the TLS cipher.
-Mc <message id> <message id> ...
This option requests Exim to run a delivery attempt on each
message, in turn, but unlike the -M option, it does check for
retry hints, and respects any that are found. This option is
not very useful to external callers. It is provided mainly
for internal use by Exim when it needs to re-invoke itself in
order to regain root privilege for a delivery. However, -Mc
can be useful when testing, in order to run a delivery that
respects retry times and other options such as hold_domains
that are overridden when -M is used. Such a delivery does not
count as a queue run. If you want to run a specific delivery
as if in a queue run, you should use -q with a message id ar-
gument. A distinction between queue run deliveries and other
deliveries is made in one or two places.
-Mes <message id> <address>
This option requests Exim to change the sender address in the
message to the given address, which must be a fully qualified
address or "<>" ("es" for "edit sender"). There must be ex-
actly two arguments. The first argument must be a message id,
and the second one an email address. However, if the message
is active (in the middle of a delivery attempt), its status
is not altered. This option can be used only by an admin
user.
-Mf <message id> <message id> ...
This option requests Exim to mark each listed message as
"frozen". This prevents any delivery attempts taking place
until the message is "thawed", either manually or as a result
of the auto_thaw configuration option. However, if any of
the messages are active (in the middle of a delivery at-
tempt), their status is not altered. This option can be used
only by an admin user.
-Mg <message id> <message id> ...
This option requests Exim to give up trying to deliver the
listed messages, including any that are frozen. However, if
any of the messages are active, their status is not altered.
For non-bounce messages, a delivery error message is sent to
the sender, containing the text "cancelled by administrator".
Bounce messages are just discarded. This option can be used
only by an admin user.
-MG <queue name> <message id> <message id> ...
This option requests that each listed message be moved from
its current queue to the given named queue. The destination
queue name argument is required, but can be an empty string
to define the default queue. If the messages are not cur-
rently located in the default queue, a -qG<name> option will
be required to define the source queue.
-Mmad <message id> <message id> ...
This option requests Exim to mark all the recipient addresses
in the messages as already delivered ("mad" for "mark all de-
livered"). However, if any message is active (in the middle
of a delivery attempt), its status is not altered. This op-
tion can be used only by an admin user.
-Mmd <message id> <address> <address> ...
This option requests Exim to mark the given addresses as al-
ready delivered ("md" for "mark delivered"). The first argu-
ment must be a message id, and the remaining ones must be
email addresses. These are matched to recipient addresses in
the message in a case-sensitive manner. If the message is ac-
tive (in the middle of a delivery attempt), its status is not
altered. This option can be used only by an admin user.
-Mrm <message id> <message id> ...
This option requests Exim to remove the given messages from
the queue. No bounce messages are sent; each message is sim-
ply forgotten. However, if any of the messages are active,
their status is not altered. This option can be used only by
an admin user or by the user who originally caused the mes-
sage to be placed in the queue.
-Mset <message id>
This option is useful only in conjunction with -be (that is,
when testing string expansions). Exim loads the given message
from its spool before doing the test expansions, thus setting
message-specific variables such as $message_size and the
header variables. The $recipients variable is made available.
This feature is provided to make it easier to test expansions
that make use of these variables. However, this option can be
used only by an admin user. See also -bem.
-Mt <message id> <message id> ...
This option requests Exim to "thaw" any of the listed mes-
sages that are "frozen", so that delivery attempts can re-
sume. However, if any of the messages are active, their sta-
tus is not altered. This option can be used only by an admin
user.
-Mvb <message id>
This option causes the contents of the message body (-D)
spool file to be written to the standard output. This option
can be used only by an admin user.
-Mvc <message id>
This option causes a copy of the complete message (header
lines plus body) to be written to the standard output in RFC
2822 format. This option can be used only by an admin user.
-Mvh <message id>
This option causes the contents of the message headers (-H)
spool file to be written to the standard output. This option
can be used only by an admin user.
-Mvl <message id>
This option causes the contents of the message log spool file
to be written to the standard output. This option can be used
only by an admin user.
-m This is apparently a synonym for -om that is accepted by
Sendmail, so Exim treats it that way too.
-N This is a debugging option that inhibits delivery of a mes-
sage at the transport level. It implies -v. Exim goes through
many of the motions of delivery - it just doesn't actually
transport the message, but instead behaves as if it had suc-
cessfully done so. However, it does not make any updates to
the retry database, and the log entries for deliveries are
flagged with "*>" rather than "=>".
Because -N discards any message to which it applies, only
root or the Exim user are allowed to use it with -bd, -q, -R
or -M. In other words, an ordinary user can use it only when
supplying an incoming message to which it will apply. Al-
though transportation never fails when -N is set, an address
may be deferred because of a configuration problem on a
transport, or a routing problem. Once -N has been used for a
delivery attempt, it sticks to the message, and applies to
any subsequent delivery attempts that may happen for that
message.
-n This option is interpreted by Sendmail to mean "no aliasing".
For normal modes of operation, it is ignored by Exim. When
combined with -bP it makes the output more terse (suppresses
option names, environment values and config pretty printing).
-O <data> This option is interpreted by Sendmail to mean set option. It
is ignored by Exim.
-oA <file name>
This option is used by Sendmail in conjunction with -bi to
specify an alternative alias filename. Exim handles -bi dif-
ferently; see the description above.
-oB <n> This is a debugging option which limits the maximum number of
messages that can be delivered down one SMTP connection,
overriding the value set in any smtp transport. If <n> is
omitted, the limit is set to 1.
-odb This option applies to all modes in which Exim accepts incom-
ing messages, including the listening daemon. It requests
"background" delivery of such messages, which means that the
accepting process automatically starts a delivery process for
each message received, but does not wait for the delivery
processes to finish.
When all the messages have been received, the reception
process exits, leaving the delivery processes to finish in
their own time. The standard output and error streams are
closed at the start of each delivery process. This is the
default action if none of the -od options are present.
If one of the queueing options in the configuration file
(queue_only or queue_only_file, for example) is in effect,
-odb overrides it if queue_only_override is set true, which
is the default setting. If queue_only_override is set false,
-odb has no effect.
-odf This option requests "foreground" (synchronous) delivery when
Exim has accepted a locally-generated message. (For the dae-
mon it is exactly the same as -odb.) A delivery process is
automatically started to deliver the message, and Exim waits
for it to complete before proceeding.
The original Exim reception process does not finish until the
delivery process for the final message has ended. The stan-
dard error stream is left open during deliveries.
However, like -odb, this option has no effect if
queue_only_override is false and one of the queueing options
in the configuration file is in effect.
If there is a temporary delivery error during foreground de-
livery, the message is left in the queue for later delivery,
and the original reception process exits.
-odi This option is synonymous with -odf. It is provided for com-
patibility with Sendmail.
-odq This option applies to all modes in which Exim accepts incom-
ing messages, including the listening daemon. It specifies
that the accepting process should not automatically start a
delivery process for each message received. Messages are
placed in the queue, and remain there until a subsequent
queue runner process encounters them. There are several con-
figuration options (such as queue_only) that can be used to
queue incoming messages under certain conditions. This option
overrides all of them and also -odqs. It always forces queue-
ing.
-odqs This option is a hybrid between -odb/-odi and -odq. However,
like -odb and -odi, this option has no effect if
queue_only_override is false and one of the queueing options
in the configuration file is in effect.
When -odqs does operate, a delivery process is started for
each incoming message, in the background by default, but in
the foreground if -odi is also present. The recipient ad-
dresses are routed, and local deliveries are done in the nor-
mal way. However, if any SMTP deliveries are required, they
are not done at this time, so the message remains in the
queue until a subsequent queue runner process encounters it.
Because routing was done, Exim knows which messages are wait-
ing for which hosts, and so a number of messages for the same
host can be sent in a single SMTP connection. The
queue_smtp_domains configuration option has the same effect
for specific domains. See also the -qq option.
-oee If an error is detected while a non-SMTP message is being re-
ceived (for example, a malformed address), the error is re-
ported to the sender in a mail message.
Provided this error message is successfully sent, the Exim
receiving process exits with a return code of zero. If not,
the return code is 2 if the problem is that the original mes-
sage has no recipients, or 1 for any other error. This is
the default -oex option if Exim is called as rmail.
-oem This is the same as -oee, except that Exim always exits with
a non-zero return code, whether or not the error message was
successfully sent. This is the default -oex option, unless
Exim is called as rmail.
-oep If an error is detected while a non-SMTP message is being re-
ceived, the error is reported by writing a message to the
standard error file (stderr). The return code is 1 for all
errors.
-oeq This option is supported for compatibility with Sendmail, but
has the same effect as -oep.
-oew This option is supported for compatibility with Sendmail, but
has the same effect as -oem.
-oi This option, which has the same effect as -i, specifies that
a dot on a line by itself should not terminate an incoming,
non-SMTP message. Otherwise, a single dot does terminate,
though Exim does no special processing for other lines that
start with a dot. This option is set by default if Exim is
called as rmail. See also -ti.
-oitrue This option is treated as synonymous with -oi.
-oMa <host address>
A number of options starting with -oM can be used to set val-
ues associated with remote hosts on locally-submitted mes-
sages (that is, messages not received over TCP/IP). These op-
tions can be used by any caller in conjunction with the -bh,
-be, -bf, -bF, -bt, or -bv testing options. In other circum-
stances, they are ignored unless the caller is trusted.
The -oMa option sets the sender host address. This may in-
clude a port number at the end, after a full stop (period).
For example:
exim4 -bs -oMa 10.9.8.7.1234
An alternative syntax is to enclose the IP address in square
brackets, followed by a colon and the port number:
exim4 -bs -oMa [10.9.8.7]:1234
The IP address is placed in the $sender_host_address vari-
able, and the port, if present, in $sender_host_port. If both
-oMa and -bh are present on the command line, the sender host
IP address is taken from whichever one is last.
-oMaa <name>
See -oMa above for general remarks about the -oM options. The
-oMaa option sets the value of $sender_host_authenticated
(the authenticator name). This option can be used with -bh
and -bs to set up an authenticated SMTP session without actu-
ally using the SMTP AUTH command.
-oMai <string>
See -oMa above for general remarks about the -oM options. The
-oMai option sets the value of $authenticated_id (the id that
was authenticated). This overrides the default value (the
caller's login id, except with -bh, where there is no de-
fault) for messages from local sources.
-oMas <address>
See -oMa above for general remarks about the -oM options. The
-oMas option sets the authenticated sender value in $authen-
ticated_sender. It overrides the sender address that is cre-
ated from the caller's login id for messages from local
sources, except when -bh is used, when there is no default.
For both -bh and -bs, an authenticated sender that is speci-
fied on a MAIL command overrides this value.
-oMi <interface address>
See -oMa above for general remarks about the -oM options. The
-oMi option sets the IP interface address value. A port num-
ber may be included, using the same syntax as for -oMa. The
interface address is placed in $received_ip_address and the
port number, if present, in $received_port.
-oMm <message reference>
See -oMa above for general remarks about the -oM options. The
-oMm option sets the message reference, e.g. message-id, and
is logged during delivery. This is useful when some kind of
audit trail is required to tie messages together. The format
of the message reference is checked and will abort if the
format is invalid. The option will only be accepted if exim
is running in trusted mode, not as any regular user.
The best example of a message reference is when Exim sends a
bounce message. The message reference is the message-id of
the original message for which Exim is sending the bounce.
-oMr <protocol name>
See -oMa above for general remarks about the -oM options. The
-oMr option sets the received protocol value that is stored
in $received_protocol. However, it does not apply (and is ig-
nored) when -bh or -bs is used. For -bh, the protocol is
forced to one of the standard SMTP protocol names. For -bs,
the protocol is always "local-" followed by one of those same
names. For -bS (batched SMTP) however, the protocol can be
set by -oMr. Repeated use of this option is not supported.
-oMs <host name>
See -oMa above for general remarks about the -oM options. The
-oMs option sets the sender host name in $sender_host_name.
When this option is present, Exim does not attempt to look up
a host name from an IP address; it uses the name it is given.
-oMt <ident string>
See -oMa above for general remarks about the -oM options. The
-oMt option sets the sender ident value in $sender_ident. The
default setting for local callers is the login id of the
calling process, except when -bh is used, when there is no
default.
-om In Sendmail, this option means "me too", indicating that the
sender of a message should receive a copy of the message if
the sender appears in an alias expansion. Exim always does
this, so the option does nothing.
-oo This option is ignored. In Sendmail it specifies "old style
headers", whatever that means.
-oP <path>
This option is useful only in conjunction with -bd or -q with
a time value. The option specifies the file to which the
process id of the daemon is written. When -oX is used with
-bd, or when -q with a time is used without -bd, this is the
only way of causing Exim to write a pid file, because in
those cases, the normal pid file is not used.
-oPX This option is not intended for general use. The daemon uses
it when terminating due to a SIGTEM, possibly in combination
with -oP <path>. It causes the pid file to be removed.
-or <time>
This option sets a timeout value for incoming non-SMTP mes-
sages. If it is not set, Exim will wait forever for the stan-
dard input. The value can also be set by the receive_timeout
option.
-os <time>
This option sets a timeout value for incoming SMTP messages.
The timeout applies to each SMTP command and block of data.
The value can also be set by the smtp_receive_timeout option;
it defaults to 5 minutes.
-ov This option has exactly the same effect as -v.
-oX <number or string>
This option is relevant only when the -bd (start listening
daemon) option is also given. It controls which ports and in-
terfaces the daemon uses. When -oX is used to start a daemon,
no pid file is written unless -oP is also present to specify
a pid filename.
-pd This option applies when an embedded Perl interpreter is
linked with Exim. It overrides the setting of the
perl_at_start option, forcing the starting of the interpreter
to be delayed until it is needed.
-ps This option applies when an embedded Perl interpreter is
linked with Exim. It overrides the setting of the
perl_at_start option, forcing the starting of the interpreter
to occur as soon as Exim is started.
-p<rval>:<sval>
For compatibility with Sendmail, this option is equivalent to
-oMr <rval> -oMs <sval>
It sets the incoming protocol and host name (for trusted
callers). The host name and its colon can be omitted when
only the protocol is to be set. Note the Exim already has
two private options, -pd and -ps, that refer to embedded
Perl. It is therefore impossible to set a protocol value of d
or s using this option (but that does not seem a real limita-
tion). Repeated use of this option is not supported.
-q This option is normally restricted to admin users. However,
there is a configuration option called prod_requires_admin
which can be set false to relax this restriction (and also
the same requirement for the -M, -R, and -S options).
If other commandline options do not specify an action, the -q
option starts one queue runner process. This scans the queue
of waiting messages, and runs a delivery process for each one
in turn. It waits for each delivery process to finish before
starting the next one. A delivery process may not actually do
any deliveries if the retry times for the addresses have not
been reached. Use -qf (see below) if you want to override
this.
If the delivery process spawns other processes to deliver
other messages down passed SMTP connections, the queue runner
waits for these to finish before proceeding.
When all the queued messages have been considered, the origi-
nal queue runner process terminates. In other words, a single
pass is made over the waiting mail, one message at a time.
Use -q with a time (see below) if you want this to be re-
peated periodically.
Exim processes the waiting messages in an unpredictable or-
der. It isn't very random, but it is likely to be different
each time, which is all that matters. If one particular mes-
sage screws up a remote MTA, other messages to the same MTA
have a chance of getting through if they get tried first.
It is possible to cause the messages to be processed in lexi-
cal message id order, which is essentially the order in which
they arrived, by setting the queue_run_in_order option, but
this is not recommended for normal use.
-q<qflags>
The -q option may be followed by one or more flag letters
that change its behaviour. They are all optional, but if more
than one is present, they must appear in the correct order.
Each flag is described in a separate item below.
-qq... An option starting with -qq requests a two-stage queue run.
In the first stage, the queue is scanned as if the
queue_smtp_domains option matched every domain. Addresses are
routed, local deliveries happen, but no remote transports are
run. Performance will be best if the queue_run_in_order op-
tion is false.
The hints database that remembers which messages are waiting
for specific hosts is updated, as if delivery to those hosts
had been deferred. After this is complete, a second, normal
queue scan happens, with routing and delivery taking place as
normal. Messages that are routed to the same host should
mostly be delivered down a single SMTP connection because of
the hints that were set up during the first queue scan. This
option may be useful for hosts that are connected to the In-
ternet intermittently.
-q[q]i... If the i flag is present, the queue runner runs delivery pro-
cesses only for those messages that haven't previously been
tried. (i stands for "initial delivery".) This can be helpful
if you are putting messages in the queue using -odq and want
a queue runner just to process the new messages.
-q[q][i]f...
If one f flag is present, a delivery attempt is forced for
each non-frozen message, whereas without f only those
non-frozen addresses that have passed their retry times are
tried.
-q[q][i]ff...
If ff is present, a delivery attempt is forced for every mes-
sage, whether frozen or not.
-q[q][i][f[f]]l
The l (the letter "ell") flag specifies that only local de-
liveries are to be done. If a message requires any remote de-
liveries, it remains in the queue for later delivery.
-q[q][i][f[f]][l][G<name>[/<time>]]]
If the G flag and a name is present, the queue runner oper-
ates on the queue with the given name rather than the default
queue. The name should not contain a / character. For a pe-
riodic queue run (see below) append to the name a slash and a
time value.
If other commandline options specify an action, a -qG<name>
option will specify a queue to operate on. For example:
exim4 -bp -qGquarantine
mailq -qGquarantine
exim4 -qGoffpeak -Rf @special.domain.example
-q<qflags> <start id> <end id>
When scanning the queue, Exim can be made to skip over mes-
sages whose ids are lexically less than a given value by fol-
lowing the -q option with a starting message id. For example:
exim4 -q 0t5C6f-0000c8-00
Messages that arrived earlier than 0t5C6f-0000c8-00 are not
inspected. If a second message id is given, messages whose
ids are lexically greater than it are also skipped. If the
same id is given twice, for example,
exim4 -q 0t5C6f-0000c8-00 0t5C6f-0000c8-00
just one delivery process is started, for that message. This
differs from -M in that retry data is respected, and it also
differs from -Mc in that it counts as a delivery from a queue
run. Note that the selection mechanism does not affect the
order in which the messages are scanned. There are also other
ways of selecting specific sets of messages for delivery in a
queue run - see -R and -S.
-q<qflags><time>
When a time value is present, the -q option causes Exim to
run as a daemon, starting a queue runner process at intervals
specified by the given time value. This form of the -q option
is commonly combined with the -bd option, in which case a
single daemon process handles both functions. A common way of
starting up a combined daemon at system boot time is to use a
command such as
/usr/sbin/exim4 -bd -q30m
Such a daemon listens for incoming SMTP calls, and also
starts a queue runner process every 30 minutes.
When a daemon is started by -q with a time value, but without
-bd, no pid file is written unless one is explicitly re-
quested by the -oP option.
-qR<rsflags> <string>
This option is synonymous with -R. It is provided for Send-
mail compatibility.
-qS<rsflags> <string>
This option is synonymous with -S.
-R<rsflags> <string>
The <rsflags> may be empty, in which case the white space be-
fore the string is optional, unless the string is f, ff, r,
rf, or rff, which are the possible values for <rsflags>.
White space is required if <rsflags> is not empty.
This option is similar to -q with no time value, that is, it
causes Exim to perform a single queue run, except that, when
scanning the messages on the queue, Exim processes only those
that have at least one undelivered recipient address contain-
ing the given string, which is checked in a case-independent
way. If the <rsflags> start with r, <string> is interpreted
as a regular expression; otherwise it is a literal string.
If you want to do periodic queue runs for messages with spe-
cific recipients, you can combine -R with -q and a time
value. For example:
exim4 -q25m -R @special.domain.example
This example does a queue run for messages with recipients in
the given domain every 25 minutes. Any additional flags that
are specified with -q are applied to each queue run.
Once a message is selected for delivery by this mechanism,
all its addresses are processed. For the first selected mes-
sage, Exim overrides any retry information and forces a de-
livery attempt for each undelivered address. This means that
if delivery of any address in the first message is success-
ful, any existing retry information is deleted, and so deliv-
ery attempts for that address in subsequently selected mes-
sages (which are processed without forcing) will run. How-
ever, if delivery of any address does not succeed, the retry
information is updated, and in subsequently selected mes-
sages, the failing address will be skipped.
If the <rsflags> contain f or ff, the delivery forcing ap-
plies to all selected messages, not just the first; frozen
messages are included when ff is present.
The -R option makes it straightforward to initiate delivery
of all messages to a given domain after a host has been down
for some time. When the SMTP command ETRN is accepted by its
ACL, its default effect is to run Exim with the -R option,
but it can be configured to run an arbitrary command instead.
-r This is a documented (for Sendmail) obsolete alternative name
for -f.
-S<rsflags> <string>
This option acts like -R except that it checks the string
against each message's sender instead of against the recipi-
ents. If -R is also set, both conditions must be met for a
message to be selected. If either of the options has f or ff
in its flags, the associated action is taken.
-Tqt <times>
This is an option that is exclusively for use by the Exim
testing suite. It is not recognized when Exim is run nor-
mally. It allows for the setting up of explicit "queue times"
so that various warning/retry features can be tested.
-t When Exim is receiving a locally-generated, non-SMTP message
on its standard input, the -t option causes the recipients of
the message to be obtained from the To:, Cc:, and Bcc: header
lines in the message instead of from the command arguments.
The addresses are extracted before any rewriting takes place
and the Bcc: header line, if present, is then removed.
If the command has any arguments, they specify addresses to
which the message is not to be delivered. That is, the argu-
ment addresses are removed from the recipients list obtained
from the headers. This is compatible with Smail 3 and in ac-
cordance with the documented behaviour of several versions of
Sendmail, as described in man pages on a number of operating
systems (e.g. Solaris 8, IRIX 6.5, HP-UX 11). However, some
versions of Sendmail add argument addresses to those obtained
from the headers, and the O'Reilly Sendmail book documents it
that way. Exim can be made to add argument addresses instead
of subtracting them by setting the option extract_ad-
dresses_remove_arguments false.
If there are any Resent- header lines in the message, Exim
extracts recipients from all Resent-To:, Resent-Cc:, and Re-
sent-Bcc: header lines instead of from To:, Cc:, and Bcc:.
This is for compatibility with Sendmail and other MTAs.
(Prior to release 4.20, Exim gave an error if -t was used in
conjunction with Resent- header lines.)
RFC 2822 talks about different sets of Resent- header lines
(for when a message is resent several times). The RFC also
specifies that they should be added at the front of the mes-
sage, and separated by Received: lines. It is not at all
clear how -t should operate in the present of multiple sets,
nor indeed exactly what constitutes a "set". In practice, it
seems that MUAs do not follow the RFC. The Resent- lines are
often added at the end of the header, and if a message is re-
sent more than once, it is common for the original set of Re-
sent- headers to be renamed as X-Resent- when a new set is
added. This removes any possible ambiguity.
-ti This option is exactly equivalent to -t -i. It is provided
for compatibility with Sendmail.
-tls-on-connect
This option is available when Exim is compiled with TLS sup-
port. It forces all incoming SMTP connections to behave as if
the incoming port is listed in the tls_on_connect_ports op-
tion.
-U Sendmail uses this option for "initial message submission",
and its documentation states that in future releases, it may
complain about syntactically invalid messages rather than
fixing them when this flag is not set. Exim ignores this op-
tion.
-v This option causes Exim to write information to the standard
error stream, describing what it is doing. In particular, it
shows the log lines for receiving and delivering a message,
and if an SMTP connection is made, the SMTP dialogue is
shown. Some of the log lines shown may not actually be writ-
ten to the log if the setting of log_selector discards them.
Any relevant selectors are shown with each log line. If none
are shown, the logging is unconditional.
-x AIX uses -x for a private purpose ("mail from a local mail
program has National Language Support extended characters in
the body of the mail item"). It sets -x when calling the MTA
from its mail command. Exim ignores this option.
-X <logfile>
This option is interpreted by Sendmail to cause debug infor-
mation to be sent to the named file. It is ignored by Exim.
-z <log-line>
This option writes its argument to Exim's logfile. Use is
restricted to administrators; the intent is for operational
notes. Quotes should be used to maintain a multi-word item
as a single argument, under most shells.
SEE ALSO
exicyclog(8), exigrep(8), exim_checkaccess(8), exim_convert4r4(8),
exim_db(8), exim_dbmbuild(8), exim_lock(8), eximon(8), exinext(8), ex-
iqgrep(8), exiqsumm(8), exiwhat(8), update-exim4.conf(8), up-
date-exim4defaults(8), /usr/share/doc/exim4-base/,
/usr/share/doc/exim4-base/README.Debian.[gz|html].
The full Exim specification, the Exim book, and the Exim wiki.
AUTHOR
This manual page was provided with the upstream Exim source package.
It was enhanced for the Debian GNU/Linux system.
EXIM4(8)