IPTUNNEL(8) System Manager's Manual IPTUNNEL(8)
NAME
iptunnel - Create and manage IP tunnels
SYNOPSIS
iptunnel { add | change | del | show } [ NAME ]
[ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]
[ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]
[ ttl TTL ] [ tos TOS ] [ nopmtudisc ] [ dev PHYS_DEV ]
iptunnel -V | --version
Where: NAME := STRING
ADDR := { IP_ADDRESS | any }
TOS := { NUMBER | inherit }
TTL := { 1..255 | inherit }
KEY := { DOTTED_QUAD | NUMBER }
DESCRIPTION
iptunnel can be used to add, change, delete and show IP tunnels on the
machine.
OPTIONS
help Show the help text.
show List existing IP tunnels.
{ add | change | del } [ NAME ]
Specify an action (add, change or delete an IP tunnel) to be ex-
ecuted by iptunnel on the tunnel named NAME, which must be a
string. You must specify one action.
mode PROTOCOL
Specify the PROTOCOL to be used for the IP tunnel. It can be
ipip for TCP/IP, gre for Cisco GRE tunnel (RFCs 1701 and 1702),
or sit for IPv6-in-IPv4 tunneling.
remote ADDR
Set the remote (i.e., destination) address of the tunnel. ADDR
must be an IP address or the word any.
local ADDR
Set the local (i.e., source) address of the tunnel. ADDR must
be an IP address or the word any.
iseq Require that all incoming packets are serialized. Only applica-
ble for GRE tunnels.
oseq Enable serialization (sequencing) for all outgoing packets.
Only applicable for GRE tunnels.
ikey KEY
Specify the input key for the Cisco GRE tunnel. KEY must be ei-
ther in dotted quad (dotted decimal) or a number. Only applica-
ble for GRE tunnels.
okey KEY
Same as ikey, but set the output key instead. Only applicable
for GRE tunnels.
icsum Require that all incoming packets have the correct checksum.
Only applicable for GRE tunnels.
ocsum Calculate checksums for all outgoing packets. Only applicable
for GRE tunnels.
ttl TTL
Specify the Time-To-Live value for the IP tunnel. TTL must be a
value between 1 and 255, or the word inherit, which causes the
field to be copied from the original IP header.
tos TOS
Specify the Type-Of-Service value for the IP tunnel. TOS must
be a value between 1 and 255, or the word inherit, which causes
the field to be copied from the original IP header.
nopmtudisc
Disable Path MTU Discovery on this tunnel. Note that a fixed
ttl is incompatible with this option.
dev PHYS_DEV
Bind the tunnel to the device PHYS_DEV.
HOMEPAGE
<https://sourceforge.net/projects/net-tools/>
AUTHORS
This manpage was written by Sergio Durigan Junior <sergiodj (at) ser-
giodj (dot) net>. A few parts were inspired by ip-tunnel(1)'s manpage.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU General Public License, Version 2 or any
later version published by the Free Software Foundation.
February 2018 version 1.60 IPTUNNEL(8)