LVSCAN(8) System Manager's Manual LVSCAN(8)
NAME
lvscan - List all logical volumes in all volume groups
SYNOPSIS
lvscan
[ option_args ]
DESCRIPTION
lvscan scans all VGs or all supported LVM block devices in the system
for LVs. The output consists of one line for each LV indicating whether
or not it is active, a snapshot or origin, the size of the device and
its allocation policy. Use lvs(8) or lvdisplay(8) to obtain more com-
prehensive information about LVs.
USAGE
lvscan
[ -a|--all ]
[ -b|--blockdevice ]
[ --ignorelockingfailure ]
[ --readonly ]
[ --reportformat basic|json ]
[ COMMON_OPTIONS ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --driverloaded y|n ]
[ --lockopt String ]
[ --longhelp ]
[ --nolocking ]
[ --profile String ]
[ --version ]
OPTIONS
-a|--all
Show information about internal LVs. These are components of
normal LVs, such as mirrors, which are not independently acces-
sible, e.g. not mountable.
-b|--blockdevice
No longer used.
--commandprofile String
The command profile to use for command configuration. See
lvm.conf(5) for more information about profiles.
--config String
Config settings for the command. These override lvm.conf set-
tings. The String arg uses the same format as lvm.conf, or may
use section/field syntax. See lvm.conf(5) for more information
about config.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the detail
of messages sent to the log file and/or syslog (if configured).
--driverloaded y|n
If set to no, the command will not attempt to use device-mapper.
For testing and debugging.
-h|--help
Display help text.
--ignorelockingfailure
Allows a command to continue with read-only metadata operations
after locking failures.
--lockopt String
Used to pass options for special cases to lvmlockd. See lvm-
lockd(8) for more information.
--longhelp
Display long help text.
--nolocking
Disable locking.
--profile String
An alias for --commandprofile or --metadataprofile, depending on
the command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and --ver-
bose. Repeat once to also suppress any prompts with answer
'no'.
--readonly
Run the command in a special read-only mode which will read on-
disk metadata without needing to take any locks. This can be
used to peek inside metadata used by a virtual machine image
while the virtual machine is running. No attempt will be made to
communicate with the device-mapper kernel driver, so this option
is unable to report whether or not LVs are actually in use.
--reportformat basic|json
Overrides current output format for reports which is defined
globally by the report/output_format setting in lvm.conf. basic
is the original format with columns and rows. If there is more
than one report per command, each report is prefixed with the
report name for identification. json produces report output in
JSON format. See lvmreport(7) for more information.
-t|--test
Run in test mode. Commands will not update metadata. This is
implemented by disabling all metadata writing but nevertheless
returning success to the calling function. This may lead to un-
usual error messages in multi-stage operations if a tool relies
on reading back metadata it believes has changed but hasn't.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the de-
tail of messages sent to stdout and stderr.
--version
Display version information.
-y|--yes
Do not prompt for confirmation interactively but always assume
the answer yes. Use with extreme caution. (For automatic no,
see -qq.)
VARIABLES
String
See the option description for information about the string con-
tent.
Size[UNIT]
Size is an input number that accepts an optional unit. Input
units are always treated as base two values, regardless of capi-
talization, e.g. 'k' and 'K' both refer to 1024. The default
input unit is specified by letter, followed by |UNIT. UNIT rep-
resents other possible input units: bBsSkKmMgGtTpPeE. b|B is
bytes, s|S is sectors of 512 bytes, k|K is kilobytes, m|M is
megabytes, g|G is gigabytes, t|T is terabytes, p|P is petabytes,
e|E is exabytes. (This should not be confused with the output
control --units, where capital letters mean multiple of 1000.)
ENVIRONMENT VARIABLES
See lvm(8) for information about environment variables used by lvm.
For example, LVM_VG_NAME can generally be substituted for a required VG
parameter.
SEE ALSO
lvm(8)lvm.conf(5)lvmconfig(8)pvchange(8)pvck(8)pvcreate(8)pvdisplay(8)pvmove(8)pvremove(8)pvresize(8)pvs(8)pvscan(8)vgcfgbackup(8)vgcfgrestore(8)vgchange(8)vgck(8)vgcreate(8) vgcon-
vert(8)vgdisplay(8)vgexport(8)vgextend(8)vgimport(8) vgimport-
clone(8)vgmerge(8)vgmknodes(8)vgreduce(8)vgremove(8)vgrename(8)vgs(8)vgscan(8)vgsplit(8)lvcreate(8)lvchange(8)lvconvert(8)lvdisplay(8)lvextend(8) lvre-
duce(8)lvremove(8)lvrename(8)lvresize(8)lvs(8)lvscan(8)lvm-fullreport(8)lvm-lvpoll(8)lvm2-activation-generator(8) blkdeacti-
vate(8)lvmdump(8)dmeventd(8)lvmpolld(8)lvmlockd(8)lvmlockctl(8)cmirrord(8) lvmd-
busd(8)lvmsystemid(7)lvmreport(7)lvmraid(7)lvmthin(7)lvmcache(7)
Red Hat, Inc. LVM TOOLS 2.03.07(2) (2019-11-30) LVSCAN(8)