MQPRIO(8) Linux MQPRIO(8)
NAME
MQPRIO - Multiqueue Priority Qdisc (Offloaded Hardware QOS)
SYNOPSIS
tc qdisc ... dev dev ( parent classid | root) [ handle major: ] mqprio
[ num_tc tcs ] [ map P0 P1 P2... ] [ queues count1@offset1 count2@off-
set2 ... ] [ hw 1|0 ] [ mode dcb|channel] ] [ shaper dcb| [ bw_rlimit
min_rate min_rate1 min_rate2 ... max_rate max_rate1 max_rate2 ... ]]
DESCRIPTION
The MQPRIO qdisc is a simple queuing discipline that allows mapping
traffic flows to hardware queue ranges using priorities and a config-
urable priority to traffic class mapping. A traffic class in this con-
text is a set of contiguous qdisc classes which map 1:1 to a set of
hardware exposed queues.
By default the qdisc allocates a pfifo qdisc (packet limited first in,
first out queue) per TX queue exposed by the lower layer device. Other
queuing disciplines may be added subsequently. Packets are enqueued us-
ing the map parameter and hashed across the indicated queues in the
offset and count. By default these parameters are configured by the
hardware driver to match the hardware QOS structures.
Channel mode supports full offload of the mqprio options, the traffic
classes, the queue configurations and QOS attributes to the hardware.
Enabled hardware can provide hardware QOS with the ability to steer
traffic flows to designated traffic classes provided by this qdisc.
Hardware based QOS is configured using the shaper parameter. bw_rlimit
with minimum and maximum bandwidth rates can be used for setting trans-
mission rates on each traffic class. Also further qdiscs may be added
to the classes of MQPRIO to create more complex configurations.
ALGORITHM
On creation with 'tc qdisc add', eight traffic classes are created map-
ping priorities 0..7 to traffic classes 0..7 and priorities greater
than 7 to traffic class 0. This requires base driver support and the
creation will fail on devices that do not support hardware QOS schemes.
These defaults can be overridden using the qdisc parameters. Providing
the 'hw 0' flag allows software to run without hardware coordination.
If hardware coordination is being used and arguments are provided that
the hardware can not support then an error is returned. For many users
hardware defaults should work reasonably well.
As one specific example numerous Ethernet cards support the 802.1Q link
strict priority transmission selection algorithm (TSA). MQPRIO enabled
hardware in conjunction with the classification methods below can pro-
vide hardware offloaded support for this TSA.
CLASSIFICATION
Multiple methods are available to set the SKB priority which MQPRIO
uses to select which traffic class to enqueue the packet.
From user space
A process with sufficient privileges can encode the destination
class directly with SO_PRIORITY, see socket(7).
with iptables/nftables
An iptables/nftables rule can be created to match traffic flows
and set the priority. iptables(8)
with net_prio cgroups
The net_prio cgroup can be used to set the priority of all sock-
ets belong to an application. See kernel and cgroup documenta-
tion for details.
QDISC PARAMETERS
num_tc Number of traffic classes to use. Up to 16 classes supported.
map The priority to traffic class map. Maps priorities 0..15 to a
specified traffic class.
queues Provide count and offset of queue range for each traffic class.
In the format, count@offset. Queue ranges for each traffic
classes cannot overlap and must be a contiguous range of queues.
hw Set to 1 to support hardware offload. Set to 0 to configure user
specified values in software only.
mode Set to channel for full use of the mqprio options. Use dcb to
offload only TC values and use hardware QOS defaults. Supported
with 'hw' set to 1 only.
shaper Use bw_rlimit to set bandwidth rate limits for a traffic class.
Use dcb for hardware QOS defaults. Supported with 'hw' set to 1
only.
min_rate
Minimum value of bandwidth rate limit for a traffic class.
max_rate
Maximum value of bandwidth rate limit for a traffic class.
AUTHORS
John Fastabend, <john.r.fastabend@intel.com>
iproute2 24 Sept 2013 MQPRIO(8)